Máy ép phun

KraussMaffei KM 300-1400 CX

Injection Moulding Machine – Krauss Maffei KM 300-1400 CX
Year of manufacture: 2025

Fully hydraulic clamping system. MC 6 control system based on an industrial computer utilizing real-time Ethernet technology, equipped with a built-in 21.5" operator panel with a full-colour touchscreen.

Plasticising unit

Kjdexdd Spepfx Ac Djnf
Complete plasticising unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle

Nozzle radius: 15 mm
Nozzle orifice: 6 mm

Technical data (standard version)

Clamping unit

Clamping force: 3000 kN
Opening force: 169 kN
Platen dimensions (H x V): 995 x 1050 mm
Tie bar spacing (H x V): 630 x 630 mm
Opening stroke: 820 mm
Minimum mould height: 330 mm
Maximum daylight: 1150 mm
Ejector stroke: 200 mm
Ejector force front/back: 58 / 28 kN

Injection unit
Screw diameter: 60 mm
L/D ratio: 20.8
Injection pressure: 2006 bar
Injection volume: 679 cm³
Shot weight (PS): 618 g
Injection speed: 110 mm/s
Injection rate (standard): 311 cm³/s
Screw speed (standard): 260 rpm

Electro-hydraulic system

Pump motor power: 45 kW
Installed heating capacity: 22.4 kW
Dry cycle time according to Euromap 6: 2.7 s
Hydraulic oil tank capacity: 720 l

Linear robot – Krauss-Maffei LRX 150

Payload < 15 kg (gripper + drives + parts)
Part removal to the operator’s opposite side

Axes:
X-axis (from mould): 900 mm, servomotor
Y-axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic
Z-axis (transverse): —

Dimensions and weight

Net weight (with control cabinet): 13.2 t
Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.