Máy ép phun nhựaKraussMaffei
EX 80-380 vollelektrisch/full electrical
Máy ép phun nhựa
KraussMaffei
EX 80-380 vollelektrisch/full electrical
Năm sản xuất
2009
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Hannover 

Dữ liệu cơ bản
- Tên máy:
- Máy ép phun nhựa
- Nhà sản xuất:
- KraussMaffei
- Năm sản xuất:
- 2009
- Tình trạng:
- rất tốt (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
- Giờ vận hành:
- 35.808 h
Giá & Vị trí
- Vị trí:
- 30 Hannover, Deutschland

Gọi điện
Chi tiết kỹ thuật
Động cơ và hộp số
Dung tích xi lanh:
204 cm³
Thông tin chi tiết
Lực kẹp:
800 kN
Áp suất phun:
1.860 thanh
Trọng lượng phun:
186 g
Đường kính trục vít:
40 mm
Chi tiết về đề nghị
- ID tin đăng:
- A21434367
- Cập nhật:
- lần cuối vào ngày 21.10.2026
Mô tả
Here, as a dealer of injection molding machines, we offer the following well-maintained, used injection molding machine:
We also purchase well-maintained injection molding machines manufactured from 2010 onwards.
We have been a wholesale supplier of injection molding machines for over 25 years.
Manufacturer: KraussMaffei
Type: KM EX 80-380 (fully electric)
Serial Number: 61013142
Year of Manufacture: 2009
Operating Hours: 35,808 h
Control System: MC 5
Fully functional
Condition: very well maintained
Machine comes from a German original owner
xxxxx without robot / without temperature control unit xxxxx
Extras:
- Needle-gate nozzle, pneumatically operated
- Pneumatic valve 1 on back wall adapter plate (BWAP)
- Pneumatic control for 1 hot runner
- Pneumatic control for hot runner/cold runner
- Defect sorting chute
- Nozzle protection door - mold opening protection door, hinged
- Euromap interface 18 on front wall adapter plate (FWAP)
- Ejector plate, electrically operated on BWAP
- Hydraulic auxiliary unit for hydraulic core pulls
- Injection molding circuit
- 2 x hydraulic core pulls (on BWAP and FWAP)
- Pressure relief for core pulls on BWAP and FWAP
- Water manifold, 8-way
- 8 x temperature control points for hot runner
- Extrusion injection circuit with position point control
- 3 x 230V sockets / 2 x CEE 16A / 1 x CEE 32A
- Signal interface EUROMAP 67 for robot
- Start-up circuit, QS package, cycle time analysis, cycle memory, event log
- BluePOWER package – display of energy consumption
- Graphics analysis package, trend graph
- Interface for temperature control unit
- Cycle time analysis, cycle setpoint optimization
Main language: German
Injection Unit
Screw diameter: 40 mm
Injection weight: 186 g/PS
Injection pressure: 1860 bar
Injection volume: 204 ccm
Clamping Unit
Clamping force: 80 tons / 800 kN
Tie bar distance: 420 x 420 mm
Platen dimensions: 655 x 670 mm
Tool installation height: 250 mm
Maximum distance between platens: 750 mm
Ejector stroke / force: 100 mm / 22 kN
Clamping unit: fully electric
Warranty
Warranty until first commissioning
- Available immediately from our warehouse in Hanover, free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs throughout Europe.
Worldwide delivery by container or box is also possible. Organization of customs clearance included.
- The machine was tested before dismantling.
- The machine is in our sole ownership.
- The requested machine is available immediately in our warehouse in Hanover and will be offered after functional testing and can be inspected under power.
Hfodjyrd U Uspfx Ab Top
For information about the machines we offer and our company:
- We only sell our own machines that we have purchased from current production, from our warehouse in Hanover.
- All offered machines are checked and tested before dismantling.
- We do NOT sell insolvency goods. We are NOT a mediator who deals with third-party property.
- All offered machines come from successful companies for which maintenance and care are a matter of course.
- All offered machines can be inspected at our warehouse.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
We also purchase well-maintained injection molding machines manufactured from 2010 onwards.
We have been a wholesale supplier of injection molding machines for over 25 years.
Manufacturer: KraussMaffei
Type: KM EX 80-380 (fully electric)
Serial Number: 61013142
Year of Manufacture: 2009
Operating Hours: 35,808 h
Control System: MC 5
Fully functional
Condition: very well maintained
Machine comes from a German original owner
xxxxx without robot / without temperature control unit xxxxx
Extras:
- Needle-gate nozzle, pneumatically operated
- Pneumatic valve 1 on back wall adapter plate (BWAP)
- Pneumatic control for 1 hot runner
- Pneumatic control for hot runner/cold runner
- Defect sorting chute
- Nozzle protection door - mold opening protection door, hinged
- Euromap interface 18 on front wall adapter plate (FWAP)
- Ejector plate, electrically operated on BWAP
- Hydraulic auxiliary unit for hydraulic core pulls
- Injection molding circuit
- 2 x hydraulic core pulls (on BWAP and FWAP)
- Pressure relief for core pulls on BWAP and FWAP
- Water manifold, 8-way
- 8 x temperature control points for hot runner
- Extrusion injection circuit with position point control
- 3 x 230V sockets / 2 x CEE 16A / 1 x CEE 32A
- Signal interface EUROMAP 67 for robot
- Start-up circuit, QS package, cycle time analysis, cycle memory, event log
- BluePOWER package – display of energy consumption
- Graphics analysis package, trend graph
- Interface for temperature control unit
- Cycle time analysis, cycle setpoint optimization
Main language: German
Injection Unit
Screw diameter: 40 mm
Injection weight: 186 g/PS
Injection pressure: 1860 bar
Injection volume: 204 ccm
Clamping Unit
Clamping force: 80 tons / 800 kN
Tie bar distance: 420 x 420 mm
Platen dimensions: 655 x 670 mm
Tool installation height: 250 mm
Maximum distance between platens: 750 mm
Ejector stroke / force: 100 mm / 22 kN
Clamping unit: fully electric
Warranty
Warranty until first commissioning
- Available immediately from our warehouse in Hanover, free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs throughout Europe.
Worldwide delivery by container or box is also possible. Organization of customs clearance included.
- The machine was tested before dismantling.
- The machine is in our sole ownership.
- The requested machine is available immediately in our warehouse in Hanover and will be offered after functional testing and can be inspected under power.
Hfodjyrd U Uspfx Ab Top
For information about the machines we offer and our company:
- We only sell our own machines that we have purchased from current production, from our warehouse in Hanover.
- All offered machines are checked and tested before dismantling.
- We do NOT sell insolvency goods. We are NOT a mediator who deals with third-party property.
- All offered machines come from successful companies for which maintenance and care are a matter of course.
- All offered machines can be inspected at our warehouse.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Tài liệu
Những tin rao vặt này cũng có thể bạn quan tâm.
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Wrocław
8.898 km
Máy ép phun
BattenfeldHM 60/350 S
BattenfeldHM 60/350 S
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Weißenburg in Bayern
9.364 km
Máy ép phun
NetstalSynergy 1000-230
NetstalSynergy 1000-230
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
München
9.346 km
Trung tâm gia công CNC vạn năng
DMG MoriDMU 50 2nd Complete
DMG MoriDMU 50 2nd Complete
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Bienne
9.684 km
Máy tiện chính xác
Schaublin180-CCN R-TM
Schaublin180-CCN R-TM
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Burgoberbach
9.384 km
Máy ép phun
KraussMaffeiKM 130-750CX 61010843
KraussMaffeiKM 130-750CX 61010843
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Hilzingen
9.557 km
BrudererBSTA 110
BRUDERERBSTA 110
BRUDERERBSTA 110
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Vaterstetten
9.330 km
Máy ép phun
KraussMaffei Technologies GmbHKM 80 / 250 PA G01
KraussMaffei Technologies GmbHKM 80 / 250 PA G01
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Fuente de Cantos
11.086 km
Máy mài vô tâm
ESTARTA310
ESTARTA310
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Szigetszentmiklós
8.818 km
Máy mài tròn
PalmaryGU20x40 NC unversal grinding machine
PalmaryGU20x40 NC unversal grinding machine
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Cestona
10.536 km
Máy mài không tâm
ESTARTA312
ESTARTA312
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi










































































































