KBA40/11000Jansen Maschinen GmbH
KBA40/11000
KBA40/11000
Jansen Maschinen GmbH
KBA40/11000
Năm sản xuất
2017
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Rastdorf 

Dữ liệu cơ bản
- Tên máy:
- KBA40/11000
- Nhà sản xuất:
- Jansen Maschinen GmbH
- Mô hình:
- KBA40/11000
- Số máy:
- 17.018.011
- Năm sản xuất:
- 2017
- Tình trạng:
- đã qua sử dụng
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
- Vị trí:
- Rastdorf, Đức

Gọi điện
Chi tiết kỹ thuật
Trục chính
Tốc độ trục chính (tối đa):
3.000 vòng/phút
Chi tiết công suất
Điện áp đầu vào:
380 V
Loại dòng điện đầu vào:
ba pha
Tài liệu và chứng nhận
Tài liệu / sổ tay hướng dẫn
Vật liệu/sản phẩm có thể gia công
Trọng lượng phôi (tối đa):
3.500 kg
Thông số trục
Khoảng cách di chuyển trục X:
11.000 mm
Khoảng cách di chuyển trục Y:
500 mm
Khoảng cách di chuyển trục Z:
500 mm
Hành trình nhanh trục Z:
5 m/phút
Tốc độ chạy nhanh trục X:
20 m/phút
Tịnh tiến nhanh trục Y:
10 m/phút
Thông tin chi tiết
Khả năng khoan:
40 mm
Tốc độ quay thay đổi vô cấp
Chi tiết về đề nghị
- ID tin đăng:
- A23345423
- Cập nhật:
- lần cuối vào ngày 17.11.2026
Mô tả
The CNC drilling machine KBA 40 is a development specifically designed for craft businesses and metalworking companies. Time-consuming measuring, marking, and center-punching are no longer necessary.
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Ibjdpfx Ahe Akrkto Nod
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Traveling tool changer
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Ibjdpfx Ahe Akrkto Nod
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Traveling tool changer
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Tài liệu
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Lần cuối trực tuyến: Hôm nay
Đã đăng ký từ: 2026
2 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 5956 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi














