đồ gỗHundegger
K2-Industry
đồ gỗ
Hundegger
K2-Industry
giá cố định VAT không thể hiển thị riêng biệt
260.000 €
năm sản xuất
2017
Tình trạng
Đã qua sử dụng
Vị trí
Westendorf 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- đồ gỗ
- Nhà sản xuất:
- Hundegger
- Mô hình:
- K2-Industry
- Số máy:
- 12762
- Năm sản xuất:
- 2017
- Tình trạng:
- gần như mới (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
giá cố định VAT không thể hiển thị riêng biệt
260.000 €
- Vị trí:
- Westendorf, Áo

Gọi điện
Chi tiết kỹ thuật
- Chiều cao cắt (tối đa):
- 300 mm
Chi tiết về đề nghị
- ID tin đăng:
- A20546290
- Cập nhật:
- lần cuối vào ngày 17.11.2025
Mô tả
Fully automatic wood infeed
Infeed roller conveyor
Infeed and loading cross conveyor
Under-table pivot cross-cut saw 11 kW
5-axis universal milling unit – UF5
Combination support for vertically operating tools
Drilling unit 2.2 kW – vertical drilling direction
Combination support for horizontally operating tools
Reinforced drilling unit (3.0 kW) horizontal drilling direction
Slotting unit 7.5 kW
Rear marking device (on the stop side)
Fully automatic beam turning station, hydraulic
Transport and positioning device "two-hand system"
Electronic control with Hundegger production software
Roller conveyor for wood outfeed with ejector
5-arm timber rack
Safety devices and guards
Refined machine surface
Extension for infeed cross conveyor
Infeed roller conveyor for timber length 13 m
Iiodoxxa Dwspfx Acwsi
5-axis universal milling unit – UF5
Revolver milling unit – vertical from above
Remote maintenance possible
Control cabinet special arrangement
Control unit for extraction with operating buttons
Extension roller conveyor 7.10 m without drive
Raising and lowering safety baffle plate
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Infeed roller conveyor
Infeed and loading cross conveyor
Under-table pivot cross-cut saw 11 kW
5-axis universal milling unit – UF5
Combination support for vertically operating tools
Drilling unit 2.2 kW – vertical drilling direction
Combination support for horizontally operating tools
Reinforced drilling unit (3.0 kW) horizontal drilling direction
Slotting unit 7.5 kW
Rear marking device (on the stop side)
Fully automatic beam turning station, hydraulic
Transport and positioning device "two-hand system"
Electronic control with Hundegger production software
Roller conveyor for wood outfeed with ejector
5-arm timber rack
Safety devices and guards
Refined machine surface
Extension for infeed cross conveyor
Infeed roller conveyor for timber length 13 m
Iiodoxxa Dwspfx Acwsi
5-axis universal milling unit – UF5
Revolver milling unit – vertical from above
Remote maintenance possible
Control cabinet special arrangement
Control unit for extraction with operating buttons
Extension roller conveyor 7.10 m without drive
Raising and lowering safety baffle plate
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Tài liệu
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Gửi yêu cầu
Điện thoại & Fax
+43 664 1... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi































