Máy phay cạnh quan tài – ETGOMA
ET
Máy phay cạnh quan tài – ET
GOMA
ET
Năm sản xuất
2010
Tình trạng
Đã qua sử dụng
Vị trí
Kłodawa 

Dữ liệu cơ bản
- Tên máy:
- Máy phay cạnh quan tài – ET
- Nhà sản xuất:
- GOMA
- Mô hình:
- ET
- Năm sản xuất:
- 2010
- Tình trạng:
- rất tốt (đã qua sử dụng)
Giá & Vị trí
- Vị trí:
- Gorzowska 8, 66-415 Kłodawa, Polska

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A23345183
- Cập nhật:
- lần cuối vào ngày 17.11.2026
Mô tả
Casket side notching machine - ET
Technical data
Data Values
Angle of the fence rotation on the table 93 - 45 degrees
Angle of the saw carriage rotation 93 - 43 degrees
Hnodpfxj Akra Us Ab Tew
Saw blade diameter φ 500 mm
Grooving blade diameter φ 180 mm
Saw motor power 4.6 kW
Grooving unit motor power 1.5 kW
Saw speed 3000 rpm
Grooving unit speed 6000 rpm
The casket side notching machine is designed for woodworking. It is used to cut the sides of caskets at specified angles and to make grooves for mounting the specified type of connector.
Features:
– cuts two elements placed side by side on the table (e.g., trimming the first side and cutting out a finished element),
– there are two pivoting fences on the table plate,
– the material is cut to the specified dimension and angle, and a groove for the connector is cut,
– a tilting cradle with spindles is mounted on a carriage with mechanical and infinitely adjustable drive,
– dimensions are displayed on the display,
– the two grooving units have slides to adjust their position relative to the saw. Optionally, one milling unit can be rotated independently of the saw.
OPERATION
The machine is switched on from the panel located on the electrical cabinet. Each saw is switched on with a separate button. The workpiece is placed on the work table. The cycle is started by pressing the foot pedal. When switched on
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Technical data
Data Values
Angle of the fence rotation on the table 93 - 45 degrees
Angle of the saw carriage rotation 93 - 43 degrees
Hnodpfxj Akra Us Ab Tew
Saw blade diameter φ 500 mm
Grooving blade diameter φ 180 mm
Saw motor power 4.6 kW
Grooving unit motor power 1.5 kW
Saw speed 3000 rpm
Grooving unit speed 6000 rpm
The casket side notching machine is designed for woodworking. It is used to cut the sides of caskets at specified angles and to make grooves for mounting the specified type of connector.
Features:
– cuts two elements placed side by side on the table (e.g., trimming the first side and cutting out a finished element),
– there are two pivoting fences on the table plate,
– the material is cut to the specified dimension and angle, and a groove for the connector is cut,
– a tilting cradle with spindles is mounted on a carriage with mechanical and infinitely adjustable drive,
– dimensions are displayed on the display,
– the two grooving units have slides to adjust their position relative to the saw. Optionally, one milling unit can be rotated independently of the saw.
OPERATION
The machine is switched on from the panel located on the electrical cabinet. Each saw is switched on with a separate button. The workpiece is placed on the work table. The cycle is started by pressing the foot pedal. When switched on
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2011
25 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+48 63 30... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi



























































































