Máy kiểm tra bánh răng côn

Gleason WELTER GW 2000 T

The bevel gear testing machine Gleason-Welter 2000 T was designed as a universal machine and is used by manufacturers of gears and transmission technologies for the single flank rolling test process of bevel and crown gears.

Technical Data
Diameter: 2000 mm
Spindle bore: 310/250 mm
Hjdewn D Uhepfx Ac Aenp
Test speed: 5-100 rpm
Dimensions: approx. 4,200 x 4,500 x 2,300 m
Machine weight: approx.12,500 kg
*Specifications and data are non-binding, subject to prior sale

Special Features:
Angle-hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with a diameter of up to 2,000 mm and shaft angles from 0 to 360 degrees, as well as straight, helical, and internal gearing.
Deviations in gear geometry, machining errors through defective tools, as well as damage to the gears, can thus be identified and eliminated before assembly.

The following parameters can be measured here:

- Single flank rolling deviation Fi', fi', fl', fk'
- Pitch deviations Fp, fp, fu
- Runout and roundness
- Runout error Fr
- Backlash
- FFT analysis

For technical questions and further information, you can contact us at any time.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.