Phẳng / bạtFliegl
SDS 390 RoadRunner
Phẳng / bạt
Fliegl
SDS 390 RoadRunner
EXW giá cố định chưa bao gồm thuế GTGT
9.900 €
Năm sản xuất
2015
Tình trạng
Đã qua sử dụng
Vị trí
Triptis 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Phẳng / bạt
- Nhà sản xuất:
- Fliegl
- Mô hình:
- SDS 390 RoadRunner
- Số máy:
- WFDFLT33902017848
- Năm sản xuất:
- 2015
- Tình trạng:
- đã qua sử dụng
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
EXW giá cố định chưa bao gồm thuế GTGT
9.900 €
- Vị trí:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

Gọi điện
Chi tiết kỹ thuật
- Trọng lượng không tải:
- 6.537 kg
- Trọng lượng tải tối đa:
- 28.463 kg
- Trọng lượng tổng cộng:
- 35.000 kg
- Cấu hình trục:
- 3 trục
- Đăng ký lần đầu:
- 10/2015
- Chiều dài không gian chứa hàng:
- 13.650 mm
- Chiều rộng khoang hàng:
- 2.480 mm
- Chiều cao khoang chứa hàng:
- 2.790 mm
- Kích thước lốp xe:
- 385/65 r22.5
- Màu sắc:
- bạc
Chi tiết về đề nghị
- ID tin đăng:
- A9058631
- Số tham chiếu:
- 37357
- Cập nhật:
- lần cuối vào ngày 06.05.2025
Mô tả
Further information
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Dedpfxjkyrmie Ah Hjul
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Dedpfxjkyrmie Ah Hjul
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Gửi yêu cầu
Điện thoại & Fax
+49 36482... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi










