Khác
Fliegl SDS 380 Gooseneck 45 Typ 2

giá cố định chưa bao gồm thuế GTGT
27.550 €
Tình trạng
Mới
Vị trí
Triptis Đức
Khác Fliegl SDS 380 Gooseneck 45 Typ 2
Khác Fliegl SDS 380 Gooseneck 45 Typ 2
Khác Fliegl SDS 380 Gooseneck 45 Typ 2
more Images
Fliegl SDS 380 Gooseneck 45 Typ 2
Fliegl SDS 380 Gooseneck 45 Typ 2
Fliegl SDS 380 Gooseneck 45 Typ 2
Hình ảnh cho thấy
Hiển thị bản đồ

Thông tin về máy móc

Tên máy:
Khác
Nhà sản xuất:
Fliegl
Mô hình:
SDS 380 Gooseneck 45 Typ 2
Số máy:
e4d182b7a074e7b83e540ed58
Tình trạng:
mới

Giá & Vị trí

giá cố định chưa bao gồm thuế GTGT
27.550 €
Vị trí người bán:
Oberpöllnitzer Straße 8, 07819 Triptis, Đức Đức
Gọi điện

Chi tiết kỹ thuật

Trọng lượng không tải:
5 kg
Trọng lượng tải tối đa:
32 kg
Trọng lượng tổng cộng:
38 kg
Cấu hình trục:
3 trục
Kích thước lốp xe:
385/55 r22.5

Chi tiết về đề nghị

ID tin đăng:
A8265392
Số tham chiếu:
20589772
Cập nhật:
lần cuối vào ngày 22.10.2024

Mô tả

Further information
Chassis Saddle Container
Welded fine-grained steel construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions
Container mountings:
Rear extension retracted:
1 x 20 feet flush with the rear, low fifth wheel load
Rear extension extended 1st stage:
1 x 30 feet, 2 x 20 feet, 1 x 40 feet with gooseneck tunnel
Rear extension extended 2nd stage:
1 x 45 feet with short gooseneck tunnel and overloaded to the rear
Rear extension extended 2nd stage + front extension 1st stage:
1 x 45 feet with long gooseneck tunnel and chamfered corners
With rear height adjustment and folding center supports for containers without tunnel
Container guide at the front Plug-in and removable (electrical, air and brake connections at the front of the front cross member)
Plug-in adapter for front locking, for locking the containers without tunnel from below, with holder when not in use
Front extension mounted on rollers, can be pulled out manually (for 45 containers with long tunnel)
Rear extension mounted on rollers, with hand crank
24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation
2 wheel chocks with holder
Aluminium side bumper
Galvanized steel underride guard
Extendable underride guard for 45 foot containers
Half-shell mudguards
with anti-spray flaps according to EG
Impact protection at the rear
Axles + suspension
SAF disc brake axles with 430 mm disc diameter
Axle/chassis laser-measured Reduction in tire wear and fuel consumption
Axle spacing offset mm (combined transport) up to 44 tons gross train weight
Air suspension
1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h)
Brake system
2-line compressed air brake systemColor-coded cable routing for easy servicing.
Spring-loaded parking brake
2 interchangeable clutch heads at the front, without connecting line
EBS, electronic braking system with EBS socket at the front, without connecting cable
Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
with lift & lower valve + auto-reset function
Vehicle stability system
Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales)
Knjdpfxoi Rizuo Ac Djf
Wheels and tires
385/55 R22.5 make of the manufacturer's choice
Steel rims, factory silver
Electrical system
24 volt, multi-chamber lights, amber LED lighting at the sides
2 white position lights at the front
2 white/red rear lane departure lights
2 x 7-pin interchangeable sockets at the front, without connecting cable
Operating instructions
The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed.
Special approval required if the total train length exceeds 16,500 mm.
When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required!
Approval / plates
Germany
Test approval according to EG 2007/46
24/7 service hotline
Prepared for single-line license plate holder
Warning sign

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.

Nhà cung cấp

Đã đăng ký từ: 2006

151 Quảng cáo trực tuyến

Gọi điện

Gửi yêu cầu

đấtus 
Đức
Áo
Thụy Sĩ
Hoa Kỳ
Vương quốc Liên hiệp Anh
Pháp
Bỉ
Tây Ban Nha
Mexico
Ý
Hà Lan
Ba Lan
Liên bang Nga
Belarus (Cộng hòa Belarus)
Ukraina
Estonia
Thổ Nhĩ Kỳ
New Zealand
Ai-len
Cộng hòa Séc
Đan Mạch
Phần Lan
Thụy Điển
Na Uy
Luxembourg
Hy Lạp
Litva
Latvia
Iceland
Bồ Đào Nha
Braxin
Venezuela
Argentina
Hungary
Slovakia
Rumani
Moldova
Slovenia
Serbia
Montenegro
Albania
Croatia
Bulgaria
Bắc Macedonia
Bosnia và Hercegovina
Israel
Ai Cập
Ma-rốc
Ấn Độ
Indonesia
Hàn Quốc
Nhật Bản
Thái Lan
Malaysia
Việt Nam
China
Đài Loan
Iran
Bangladesh
Lưu ý: Yêu cầu của bạn sẽ được chuyển tới tất cả người bán trong danh mục máy móc. Nhờ vậy, bạn có thể nhận được rất nhiều lời đề nghị.
Không thể gửi yêu cầu. Vui lòng thử lại sau.

Điện thoại & Fax

+49 36482... quảng cáo