Rơ-moóc sàn thao tácFAYMONVILLE
MAX Trailer MAX410 Ballastauflieger
Rơ-moóc sàn thao tác
FAYMONVILLE
MAX Trailer MAX410 Ballastauflieger
Tình trạng
Đã qua sử dụng
Vị trí
Essen 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
Giá & Vị trí
- Vị trí người bán:
- Heegstraße 6-8, 45356 Essen, Đức

Gọi điện
Chi tiết kỹ thuật
- Trọng lượng tải tối đa:
- 44.420 kg
- Trọng lượng tổng cộng:
- 53.000 kg
- Cấu hình trục:
- 3 trục
- Đăng ký lần đầu:
- 04/2025
- Kiểm định tiếp theo (TÜV):
- 04/2026
- Chiều dài không gian chứa hàng:
- 11.500 mm
- Tổng chiều rộng:
- 2.540 mm
- Thiết bị:
- ABS
Chi tiết về đề nghị
- ID tin đăng:
- A21520922
- Số tham chiếu:
- 37347
- Cập nhật:
- lần cuối vào ngày 17.03.2026
Mô tả
You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment list. Full specifications available upon request.
Cargo Area:
* Cargo deck with approximately 30 mm thick hardwood floor
* 9 pairs of folding lashing rings (LC 10,000 daN)
* 10 pairs of stake pockets in the outer frame for approx. 100 x 50 mm plug-in stakes
Landing Legs:
* Hydraulic landing legs
Tyres:
* Tyres 385/65 R 22.5 – MICHELIN MULTI High Load 164K
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via standardized EBS interface per ISO 11992. For correct display, the truck must be equipped to transmit and display this data.
Axles and Suspension:
* BPW axles, technical axle load 10,000 kg each; first axle hydro-mechanically steered, second fixed, third hydro-mechanically forced steering, mounted on turntable
* Air suspension with raise and lower valve
Braking System:
* WABCO braking system per EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Electrical System:
* Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
Hedpfx Afsyu Eu Ijxjni
* ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets in accordance with ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel Structure:
* High-strength fine-grain steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa)
Painting:
* Entire steel structure automatically blast-cleaned after welding using a shot-blasting system
* Second blast cleaning with corundum for optimal coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection
* Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Deep Black per RAL system 841GL
* Rear section metallized and painted in RAL 9010 (Pure White)
* Rims painted silver-grey
* Paint system tested by salt spray test to ISO 9227-NSS
* Sealant wax applied to cavities
Included Accessories:
* Cargo deck with approx. 30 mm thick hardwood floor
* 2” kingpin
* One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high
* At galvanized front connection bar: DUOMATIC air couplings
* Storage for approx. 1,000 mm plug-in stakes in the center beam at the rear
* At gooseneck and rear plate, left and right, each with a holder for warning plates including socket
* White reflective tape according to EU regulations on sides and red at the rear
* 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the cargo deck
* European reflective markers (red/yellow) on trailer rear
* Bracket for rotating beacon at the rear of trailer
* Mudflap at the rear of trailer
* Manual and documentation on USB stick
* Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard
* 4 wheel chocks with holder at front wall
* Rear and front steering can be operated by cable remote control with push buttons, featuring axle single-track control (without installation in tractor unit)
* Electro-hydraulic power pack
* 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high
* 5 pairs of crosswise mounted stake pocket rails in load floor for approx. 100 x 50 mm plug-in stakes
* One INOX toolbox, approx. 1,200 x 460 x 55
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Excerpt from the equipment list. Full specifications available upon request.
Cargo Area:
* Cargo deck with approximately 30 mm thick hardwood floor
* 9 pairs of folding lashing rings (LC 10,000 daN)
* 10 pairs of stake pockets in the outer frame for approx. 100 x 50 mm plug-in stakes
Landing Legs:
* Hydraulic landing legs
Tyres:
* Tyres 385/65 R 22.5 – MICHELIN MULTI High Load 164K
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via standardized EBS interface per ISO 11992. For correct display, the truck must be equipped to transmit and display this data.
Axles and Suspension:
* BPW axles, technical axle load 10,000 kg each; first axle hydro-mechanically steered, second fixed, third hydro-mechanically forced steering, mounted on turntable
* Air suspension with raise and lower valve
Braking System:
* WABCO braking system per EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Electrical System:
* Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
Hedpfx Afsyu Eu Ijxjni
* ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets in accordance with ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel Structure:
* High-strength fine-grain steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa)
Painting:
* Entire steel structure automatically blast-cleaned after welding using a shot-blasting system
* Second blast cleaning with corundum for optimal coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection
* Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Deep Black per RAL system 841GL
* Rear section metallized and painted in RAL 9010 (Pure White)
* Rims painted silver-grey
* Paint system tested by salt spray test to ISO 9227-NSS
* Sealant wax applied to cavities
Included Accessories:
* Cargo deck with approx. 30 mm thick hardwood floor
* 2” kingpin
* One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high
* At galvanized front connection bar: DUOMATIC air couplings
* Storage for approx. 1,000 mm plug-in stakes in the center beam at the rear
* At gooseneck and rear plate, left and right, each with a holder for warning plates including socket
* White reflective tape according to EU regulations on sides and red at the rear
* 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the cargo deck
* European reflective markers (red/yellow) on trailer rear
* Bracket for rotating beacon at the rear of trailer
* Mudflap at the rear of trailer
* Manual and documentation on USB stick
* Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard
* 4 wheel chocks with holder at front wall
* Rear and front steering can be operated by cable remote control with push buttons, featuring axle single-track control (without installation in tractor unit)
* Electro-hydraulic power pack
* 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high
* 5 pairs of crosswise mounted stake pocket rails in load floor for approx. 100 x 50 mm plug-in stakes
* One INOX toolbox, approx. 1,200 x 460 x 55
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2003
75 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 201 8... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Quảng cáo nhỏ
Essen
9.562 km
Rơ-moóc sàn thao tác
FAYMONVILLEMAX Trailer MAX410 Ballastauflieger
FAYMONVILLEMAX Trailer MAX410 Ballastauflieger
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi































