Máy khoan xuyên tâm CNC tốc độ cao

DONAU Danumeric 440

Machine Version
• Work table 1200 x 600 mm with 4T-slots
• Ram travel 750 mm
• Drilling spindle SK 40 with tool clamping device
• Stepless speed programming
• Stepless quill feed via three-phase servo motor
• 2 T-slots 18 mm on the machine base at the rear
• 2 T-slots 18 mm on the machine base on the left
• Thread cutting device
• Central lubrication
• Coolant system
• Machine lamp
• CE marking
• Protective device
• USB interface

Dimensions and travels
Tool holder SK 40
Column diameter mm 195
Table dimensions mm 1800 x 600
Number of T-slots 4
Distance between T-slots mm 125
Quill stroke (Z-axis) mm 200
Column stroke (W-axis) mm 410
Distance Spindle bottom edge - min mm 70
Table top edge max. mm 680
Distance Spindle bottom edge - min mm 970
Ground max. mm 1580
Drilling radius mm 540 - 1590
Work table height mm 900

Machining values
Drilling capacity in steel St 60  40
Cast iron GG 22  50
Thread cutting Steel St 60 M 36
Cast iron GG 22 M 42

Main spindle drive
AC motor, frequency-controlled kW 5.5 at 100 % duty cycle
Speed range: min -1 15 - 2800
Torque Nm max. 250
constant from min -1 15 – 2000

Feed drives
X-axis - AC - Servo motor kW 0.25
Y-axis - AC - Servo motor kW 0.25
Z-axis - AC - Servo motor kW 4.50
W-axis - AC - Servo motor kW 2.50
Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5
Rapid traverse speeds (W): m/min 3
Feed rates, stepless mm/min 5 – 2000

Accuracy
Positioning accuracy X, Y axis
on 1200 mm mm ± 0.075

Electrical data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Hydraulic unit for clamping kW 0.75
Total connected load kVA 13.0

Weight Danumeric 440 (without packaging)
with table 1800 x 600 mm kg 2800

CNC control
Axes: 4 (X, Y, Z, W), expandable
Processor: 32-bit CPU
Screen: TFT flat screen backlit, easily readable from all sides, 215 x 160 mm
Position data: Cartesian or polar, dimensions absolute or incremental,
Unit: mm or inch or in degrees
Interpolation: 2 axes (X, Y)

Technology database: Tool management, tool suggestions according to
Machining type, material-dependent cutting data suggestions
Tool management: max. 500 tools
Subprogram technique: yes

Machining cycles

Standard software options: Programming in dialog, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted start
Hedpfx Asz S T A Eeg Donu
Zero point determination: Cycles to determine zero points by manually
probing the workpiece for:
- any clamped rectangular parts
- any clamped round parts
- aligning castings and forged parts
- Angle detection in round parts by probing
reference edges or surfaces
Test graphic Graphical display of drilling patterns

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.