Máy tiện CNC

DN Solutions PUMA2600 SLYB II

For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter.

NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation.

TECHNICAL DATA according to manufacturer’s specification:

1) Capacity
Swing over bed: 680 mm
Swing over cross slide: 630 mm
Max. turning diameter: 376 mm
Recommended turning diameter: 315 mm
Max. turning length: 1245 mm
Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg)
Bar capacity in spindle: 102 mm

2) Main Spindle
Chuck: 315 mm
Spindle nose: A2#11 ASA
Front spindle bearing diameter: 160 mm
Spindle bore: 115 mm
Chuck through hole: 103 mm
Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW
Spindle speed range: 2 - 800 rpm
Max. spindle torque (S3-15%): 1123 Nm
Power transmission: Belt

3) Sub-Spindle
Chuck: 175 mm (optionally 210 mm)
Spindle nose: A2#5 ASA
Spindle bore (diameter): 62 mm
Sub-spindle cylinder bore: 50 mm (H8)
Spindle motor power (continuous/30 min): 7.5/5.5 kW
Sub-spindle speed range: 4,500 rpm
Max. spindle torque (30 min): 85 Nm
Power transmission: Belt

4) Axis Travel
X axis: 260 mm
Z axis: 1350 mm
Y axis: 105 (±52.5) mm
B axis: 1350 mm
C axis (1, 2): 360° (0.001° increments)
Rapid traverse:
X axis: 30 m/min
Z axis: 30 m/min
Y axis: 10 m/min
B axis: 30 m/min
Hedpfx Ajx Rqkujfxsfd
C axis: 200 rpm

5) Bed and Saddle
Slant bed, tilt angle: 30°
Bed guideway (Z axis): 437 mm
Saddle (X/Y axis): 321/325 mm
Sub-spindle stroke: 335 mm

6) Tooling System
Tool holders: BMT 65P
Number of tools: 12
Tool size: 25 x 25 mm
Max. drill diameter: 50/32 mm (main/sub-spindle)
Driven tool motor power (5 min/Cont): 7.5/1.5 kW
Driven tool speed: 5,000 rpm
Driven tool max. torque: 95.5 Nm
Driven tool collets (ER32): Φ3–Φ20mm (option)
Turret indexing time: Single position: 0.15 s (1.2 s full station)
Max. driven tool drilling diameter: φ20 mm, M20 x P2.5

7) Hydraulic System
Tank capacity: 20 l
Flow rate (60/50 Hz): 25 / 20.8 l/min
Power/Pressure: 2.2 kW x 5.0 MPa

8) Coolant
Tank capacity: 250 l
Flow rate: 30 l/min
Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz)

9) Machine Accuracy
Positioning: 0.01 mm
Repeatability: 0.02 mm
C Axis Positioning: 0.0167°
Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm
C Axis repeatability: ±0.006°

10) Control System
Full electric control for X, Y, Z, C axes

For further questions or additional information, please feel free to contact us by message or phone.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.