DMG NHX5000DMG
NHX5000
DMG NHX5000
DMG
NHX5000
Năm sản xuất
2023
Tình trạng
Đã qua sử dụng
Vị trí
Áo 

Dữ liệu cơ bản
- Tên máy:
- DMG NHX5000
- Nhà sản xuất:
- DMG
- Mô hình:
- NHX5000
- Năm sản xuất:
- 2023
- Tình trạng:
- sẵn sàng sử dụng (đã qua sử dụng)
- Giờ vận hành:
- 1.612 h
Giá & Vị trí
- Vị trí:
- , Áo

Gọi điện
Chi tiết kỹ thuật
Kích thước và trọng lượng
Trọng lượng tổng cộng:
12.000 kg
Trục chính
Công suất động cơ trục chính:
37.000 W
Tốc độ trục chính (tối đa):
20.000 vòng/phút
Thông số trục
Khoảng cách di chuyển trục X:
730 mm
Khoảng cách di chuyển trục Y:
730 mm
Khoảng cách di chuyển trục Z:
880 mm
Thông tin chi tiết
Nhà sản xuất bộ điều khiển:
FANUC
Mô hình bộ điều khiển:
F31iB with CELOS
Số lượng trục:
4
Chi tiết về đề nghị
- ID tin đăng:
- A23352278
- Số tham chiếu:
- AT-MIL-DMG-2023-00001
- Cập nhật:
- lần cuối vào ngày 18.11.2026
Mô tả
This 4-axis DMG NHX5000 was manufactured in 2023. It features X, Y and Z travels of 730, 730 and 880 mm, a 20,000 rpm spindle, and a 60-tool magazine. The machine also includes a two-station automatic pallet changer with 500 x 500 mm pallets. Consider the opportunity to buy this DMG NHX5000 horizontal machining centre. Contact us for further details.
Iodpfx As Aky T Ash Nobd
- Total Power-On Time (Total Zeit): 6,393.1 h- Machining / Cutting Hours (Bearbeitung): 1,611.8 h- Ready Hours (Betriebsbereit): 827.3 h- Standby Hours: 3,954.2 h- Control System: Fanuc F31iB with CELOS (ERGOline Touch 21.5-inch multi-touchscreen, MAPPS system, CELOS version 006.055.009 | 48182)- Screen Display Language: English (MAPPS, NC, and PC screens)- Travel X / Y / Z: 730 / 730 / 880 mm- Rapid Traverse: 60 m/min- Acceleration: Up to 12 m/s²- Chip-to-Chip Time: 2.5 sec- Workpiece Clamping Surface (Pallet Size): 500 x 500 mm (2 pallets with tapped holes)- Pallet Changer: Automatic rotary APC with 2 stations- B-Axis Indexing: Full 4th-axis / arbitrary indexing B-axis (min. indexing angle 0.001°, direct drive DD motor, hydraulic disc brake clamping, max. speed 100 rpm)- Pallet Hydraulic Fixture Interface (Auto-Coupler): 2 hydraulic clamping circuits and 2 air check lines (max. pressure 7 MPa / 1,015 psi) with drainage circuit- Spindle: speedMASTER® high-speed motor spindle, max. 20,000 rpm- Spindle Power: 37 / 26 / 18.5 kW (50 / 34.7 / 24.7 HP) (15% ED / 30 min / continuous)- Spindle Torque: 221 / 107 / 86.8 Nm (10% ED / 15 min / continuous)- Spindle Taper: HSK-A63 (Option J-019116 overriding standard BT40)- Tool Magazine Capacity: 60 tools (Ring magazine, random sorting; Option J-019095 overriding standard 40 tools)- Magazine-Side Operation Panel: 7-inch touch panel (J-009825)- Max. Tool Diameter: 70 mm (with adjacent tools) / 170 mm (without adjacent tools)- Max. Tool Length: 550 mm- Max. Tool Weight: 12 kg- Max. Tool Moment: 7.84 Nm- Coolant Type: Water-soluble coolant specification- Coolant Tank Capacity: 800 L (tank depth 400 mm)- Chip Conveyor: External chip conveyor, rear discharge, with drum filter (discharge height 1,090 mm)- Through-Spindle Coolant (CTS): Prepared for central coolant supply / interface for 8-stage high-pressure CTS (max. 7 MPa) + coolant/air through-spindle switching function (3/8" air connection)- Band Filter & High-Pressure Unit: TMF300 band filter system (600 L tank, IFM LK1022/LK1023 level sensor, high-pressure pump 0.1–7 MPa / 1–70 bar at 32 L/min, low-pressure pump 0.5 MPa / 5 bar at 100 L/min, lift pump 0.9 bar at 240 L/min)- Coolant Chiller: Without coolant chiller (J-014459)- Oil Mist Collector Interface: Suction port Ø 200 mm + electrical parts for AFS 1600- Measuring & Monitoring: Renishaw OMP60 optical spindle probe + workpiece setter; internal Renishaw table touch sensor for tool length/diameter measurement and breakage detection; tool breakage control system in magazine; MPC (Machine Protection Control) vibration sensor system on milling spindle- Automation & Interfaces: 4-color LED signal tower (Red, Yellow, Green, Blue), EtherNet/IP interface, 10 external M-codes (relay contact AC 250 V, max.
Iodpfx As Aky T Ash Nobd
- Total Power-On Time (Total Zeit): 6,393.1 h- Machining / Cutting Hours (Bearbeitung): 1,611.8 h- Ready Hours (Betriebsbereit): 827.3 h- Standby Hours: 3,954.2 h- Control System: Fanuc F31iB with CELOS (ERGOline Touch 21.5-inch multi-touchscreen, MAPPS system, CELOS version 006.055.009 | 48182)- Screen Display Language: English (MAPPS, NC, and PC screens)- Travel X / Y / Z: 730 / 730 / 880 mm- Rapid Traverse: 60 m/min- Acceleration: Up to 12 m/s²- Chip-to-Chip Time: 2.5 sec- Workpiece Clamping Surface (Pallet Size): 500 x 500 mm (2 pallets with tapped holes)- Pallet Changer: Automatic rotary APC with 2 stations- B-Axis Indexing: Full 4th-axis / arbitrary indexing B-axis (min. indexing angle 0.001°, direct drive DD motor, hydraulic disc brake clamping, max. speed 100 rpm)- Pallet Hydraulic Fixture Interface (Auto-Coupler): 2 hydraulic clamping circuits and 2 air check lines (max. pressure 7 MPa / 1,015 psi) with drainage circuit- Spindle: speedMASTER® high-speed motor spindle, max. 20,000 rpm- Spindle Power: 37 / 26 / 18.5 kW (50 / 34.7 / 24.7 HP) (15% ED / 30 min / continuous)- Spindle Torque: 221 / 107 / 86.8 Nm (10% ED / 15 min / continuous)- Spindle Taper: HSK-A63 (Option J-019116 overriding standard BT40)- Tool Magazine Capacity: 60 tools (Ring magazine, random sorting; Option J-019095 overriding standard 40 tools)- Magazine-Side Operation Panel: 7-inch touch panel (J-009825)- Max. Tool Diameter: 70 mm (with adjacent tools) / 170 mm (without adjacent tools)- Max. Tool Length: 550 mm- Max. Tool Weight: 12 kg- Max. Tool Moment: 7.84 Nm- Coolant Type: Water-soluble coolant specification- Coolant Tank Capacity: 800 L (tank depth 400 mm)- Chip Conveyor: External chip conveyor, rear discharge, with drum filter (discharge height 1,090 mm)- Through-Spindle Coolant (CTS): Prepared for central coolant supply / interface for 8-stage high-pressure CTS (max. 7 MPa) + coolant/air through-spindle switching function (3/8" air connection)- Band Filter & High-Pressure Unit: TMF300 band filter system (600 L tank, IFM LK1022/LK1023 level sensor, high-pressure pump 0.1–7 MPa / 1–70 bar at 32 L/min, low-pressure pump 0.5 MPa / 5 bar at 100 L/min, lift pump 0.9 bar at 240 L/min)- Coolant Chiller: Without coolant chiller (J-014459)- Oil Mist Collector Interface: Suction port Ø 200 mm + electrical parts for AFS 1600- Measuring & Monitoring: Renishaw OMP60 optical spindle probe + workpiece setter; internal Renishaw table touch sensor for tool length/diameter measurement and breakage detection; tool breakage control system in magazine; MPC (Machine Protection Control) vibration sensor system on milling spindle- Automation & Interfaces: 4-color LED signal tower (Red, Yellow, Green, Blue), EtherNet/IP interface, 10 external M-codes (relay contact AC 250 V, max.
Những tin rao vặt này cũng có thể bạn quan tâm.
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Düsseldorf
9.579 km
Trung tâm gia công ngang
DMG MORINHX 5000
DMG MORINHX 5000
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Monheim am Rhein
9.578 km
Trung tâm gia công ngang CNC
DMG MORINHX 5000
DMG MORINHX 5000
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Áo
9.576 km
DMG MORI NHX 5000
DMG MORINHX 5000
DMG MORINHX 5000
Thành công
Tin nhắn của bạn đã được gửi đi.
Đấu giá
Đấu giá đã kết thúc
Bayern
9.329 km
Trung tâm gia công ngang
DMGNHX 5000
DMGNHX 5000
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi











































































