Rơ moóc bán mở với bạt phủDINKEL
3-Achs-Sattelanhänger, Pritsche+Plane, LBW
Rơ moóc bán mở với bạt phủ
DINKEL
3-Achs-Sattelanhänger, Pritsche+Plane, LBW
Tình trạng
Đã qua sử dụng
Vị trí
Essen 

Thông tin về máy móc
Giá & Vị trí
- Vị trí người bán:
- Heegstraße 6-8, 45356 Essen, Đức

Gọi điện
Chi tiết kỹ thuật
- Trọng lượng tải tối đa:
- 31.710 kg
- Trọng lượng tổng cộng:
- 42.000 kg
- Cấu hình trục:
- 3 trục
- Đăng ký lần đầu:
- 10/2016
- Tổng chiều rộng:
- 2.550 mm
- Thiết bị:
- ABS
Chi tiết về đề nghị
- ID tin đăng:
- A21746438
- Số tham chiếu:
- 37809
- Cập nhật:
- lần cuối vào ngày 01.05.2026
Mô tả
You can find our entire range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the equipment features. Complete specification available on request.
- Wedge-shaped chassis with increased point load capacity, approx. 25,000 kg over approx. 5,000 mm
- 24,000 kg telescopic support winches with load and fast operation modes
- Lashing positions available in 5,000 kg, 6,000 kg, and 10,000 kg configurations
- 8 stake pocket inserts (for 2nd bulkhead)
- Aluminum roof girders with sliding tarpaulin
- Rear stakes extendable to approx. 3,500 mm (for loading and unloading only)
- Three sliding stanchions on each side
- End stanchions extendable lengthwise in direction of travel
Ledpfx Ajy Dy Ehsf Ssrl
- Complete front wall designed as storage compartment with integrated shelving system, interior closed
- DINKEL mechanical lifting roof, height-adjustable, lifting roof height 400 mm, operable from both sides or one side only
- Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm) via stanchion height setting
- Trailer can be driven under tarpaulin up to total height of approx. 4,400 mm (rear open over tail lift)
- Upper rear portal crossbar with movable sliding tarpaulin
- Four rows of stackable 150 mm aluminum slats on each side (two rows in upper bunk only), 450 mm pockets at bottom, four rows of pockets above, evenly spaced intervals
- WABCO compressed air brake system with EBS to EC Standard 71/320 EEC incl. PREV
- ECAS air suspension with raise/lower function
- Wabco Smart Board with axle load display and hubodometer
- 3 x 10,000 kg SAF axles with drum brakes
- 3rd axle: friction-steered trailing axle
- 1st axle liftable
- Tires: 235/75 R 17.5
- Dhollandia heavy-duty tail lift, type DHLSU, load capacity 9,000 kg, load center 1,000 mm, steel platform approx. 3,000 x 2,500 mm
- Hydraulic auxiliary stabilizers with automatic ground leveling
- Tail lift with ramp function for inclined platform setup, usable as loading ramp – loadable up to max. 13,500 kg
- Chassis painted in MB nova grey
- White bodywork with customer-specific tarpaulin lettering
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Excerpt from the equipment features. Complete specification available on request.
- Wedge-shaped chassis with increased point load capacity, approx. 25,000 kg over approx. 5,000 mm
- 24,000 kg telescopic support winches with load and fast operation modes
- Lashing positions available in 5,000 kg, 6,000 kg, and 10,000 kg configurations
- 8 stake pocket inserts (for 2nd bulkhead)
- Aluminum roof girders with sliding tarpaulin
- Rear stakes extendable to approx. 3,500 mm (for loading and unloading only)
- Three sliding stanchions on each side
- End stanchions extendable lengthwise in direction of travel
Ledpfx Ajy Dy Ehsf Ssrl
- Complete front wall designed as storage compartment with integrated shelving system, interior closed
- DINKEL mechanical lifting roof, height-adjustable, lifting roof height 400 mm, operable from both sides or one side only
- Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm) via stanchion height setting
- Trailer can be driven under tarpaulin up to total height of approx. 4,400 mm (rear open over tail lift)
- Upper rear portal crossbar with movable sliding tarpaulin
- Four rows of stackable 150 mm aluminum slats on each side (two rows in upper bunk only), 450 mm pockets at bottom, four rows of pockets above, evenly spaced intervals
- WABCO compressed air brake system with EBS to EC Standard 71/320 EEC incl. PREV
- ECAS air suspension with raise/lower function
- Wabco Smart Board with axle load display and hubodometer
- 3 x 10,000 kg SAF axles with drum brakes
- 3rd axle: friction-steered trailing axle
- 1st axle liftable
- Tires: 235/75 R 17.5
- Dhollandia heavy-duty tail lift, type DHLSU, load capacity 9,000 kg, load center 1,000 mm, steel platform approx. 3,000 x 2,500 mm
- Hydraulic auxiliary stabilizers with automatic ground leveling
- Tail lift with ramp function for inclined platform setup, usable as loading ramp – loadable up to max. 13,500 kg
- Chassis painted in MB nova grey
- White bodywork with customer-specific tarpaulin lettering
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2003
75 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 201 8... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi




















