Máy mài dụng cụ CNCCORMAK
DG20CNC
Máy mài dụng cụ CNC
CORMAK
DG20CNC
Giá cố định chưa bao gồm thuế GTGT
4.610 €
Năm sản xuất
2026
Tình trạng
Mới
(hoạt động hoàn toàn)
Vị trí
Siedlce 

Dữ liệu cơ bản
- Tên máy:
- Máy mài dụng cụ CNC
- Nhà sản xuất:
- CORMAK
- Mô hình:
- DG20CNC
- Năm sản xuất:
- 2026
- Tình trạng:
- mới
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
Giá cố định chưa bao gồm thuế GTGT
4.610 €
- Vị trí:
- Brzeska 120, 08-110 Siedlce, Polska

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A23364415
- Cập nhật:
- lần cuối vào ngày 20.11.2026
Mô tả
CORMAK DG20CNC CNC Tool Grinder for End Mills and Drill Bits
Features of the CORMAK DG20CNC CNC Tool Grinder
The CORMAK DG20CNC is a CNC tool grinding machine designed for reconditioning end mills, corner radius end mills, ball nose end mills, twist drill bits, and countersinks. The ability to sharpen five different tool categories at a single workstation simplifies the organization of tool sharpening operations in workshops, tool rooms, and manufacturing facilities.
In-house tool sharpening allows cutting tools to be prepared for reuse according to current production requirements. It reduces the need to send tools to external sharpening services and makes it easier to manage tool reconditioning schedules.
Key Advantages
- Five tool categories at a single workstation – sharpening tools used for milling, drilling, and countersinking operations.
- Support for 2-, 3-, and 4-flute end mills – reconditioning of standard end mills and corner radius end mills with diameters ranging from 4 to 20 mm.
- Corner radius and ball nose end mills – sharpening of corner radius end mills with radii of R0.5–3 mm and ball nose end mills with diameters of 4–12 mm.
- Adjustable drill point angle of 118–140° – allows the sharpening geometry to be adjusted for twist drill bits with diameters ranging from 4 to 20 mm.
- 90° countersinks – reconditioning of countersinking tools with diameters of 4–12 mm, used for hole machining operations.
- 230 V power supply – allows a tool sharpening workstation to be set up without requiring a three-phase electrical connection.
CNC Control in X, Y, Z, and C Axes
Four CNC-controlled axes – X, Y, Z, and C – perform the movements required by the selected sharpening program.
The automatic feed system with stepless speed adjustment allows the grinding process to be adapted to the specific operation being performed.
Operation and Sharpening Cycle
Itodpfxo Ala H Uo Adhep
The operator secures and positions the tool, then selects the tool type on the control panel and enters its diameter, number of cutting edges, and the length of the worn section to be removed.
After checking the settings, the operator starts the sharpening cycle, which the machine performs automatically according to the selected program.
Spindle and Cooling System
The spindle operates at a speed of 3000 rpm. The cooling system is equipped with a 70 W coolant pump.
The supply of coolant to the grinding area helps dissipate heat and remove grinding debris generated during the sharpening process.
Standard Equipment
- Set of 9 collets in a carrying case with protective foam insert.
- Two collet nut wrenches – ER32 and ER25A.
- Touchscreen stylus with holder and safety tether.
- Power cable.
Technical Specifications
Model CORMAK DG20CNC
CNC-controlled axes X, Y, Z, C
End mill diameters 4–20 mm
Number of end mill cutting edges 2, 3, or 4
Corner radius end mill diameters 4–20 mm
Number of corner radius end mill cutting edges 2, 3, or 4
Corner radius range R0.5–3 mm
Ball nose end mill diameters 4–12 mm
Twist drill bit diameters 4–20 mm
Drill point angle 118–140°
Countersink diameters 4–12 mm
Countersink angle 90°
Spindle speed 3000 rpm
Feed system Automatic, with stepless speed adjustment
Coolant pump power 70 W
Motor power 2.5 kW
Power supply 230 V
Dimensions 900 × 640 × 930 mm
Weight 153 kg
Features of the CORMAK DG20CNC CNC Tool Grinder
The CORMAK DG20CNC is a CNC tool grinding machine designed for reconditioning end mills, corner radius end mills, ball nose end mills, twist drill bits, and countersinks. The ability to sharpen five different tool categories at a single workstation simplifies the organization of tool sharpening operations in workshops, tool rooms, and manufacturing facilities.
In-house tool sharpening allows cutting tools to be prepared for reuse according to current production requirements. It reduces the need to send tools to external sharpening services and makes it easier to manage tool reconditioning schedules.
Key Advantages
- Five tool categories at a single workstation – sharpening tools used for milling, drilling, and countersinking operations.
- Support for 2-, 3-, and 4-flute end mills – reconditioning of standard end mills and corner radius end mills with diameters ranging from 4 to 20 mm.
- Corner radius and ball nose end mills – sharpening of corner radius end mills with radii of R0.5–3 mm and ball nose end mills with diameters of 4–12 mm.
- Adjustable drill point angle of 118–140° – allows the sharpening geometry to be adjusted for twist drill bits with diameters ranging from 4 to 20 mm.
- 90° countersinks – reconditioning of countersinking tools with diameters of 4–12 mm, used for hole machining operations.
- 230 V power supply – allows a tool sharpening workstation to be set up without requiring a three-phase electrical connection.
CNC Control in X, Y, Z, and C Axes
Four CNC-controlled axes – X, Y, Z, and C – perform the movements required by the selected sharpening program.
The automatic feed system with stepless speed adjustment allows the grinding process to be adapted to the specific operation being performed.
Operation and Sharpening Cycle
Itodpfxo Ala H Uo Adhep
The operator secures and positions the tool, then selects the tool type on the control panel and enters its diameter, number of cutting edges, and the length of the worn section to be removed.
After checking the settings, the operator starts the sharpening cycle, which the machine performs automatically according to the selected program.
Spindle and Cooling System
The spindle operates at a speed of 3000 rpm. The cooling system is equipped with a 70 W coolant pump.
The supply of coolant to the grinding area helps dissipate heat and remove grinding debris generated during the sharpening process.
Standard Equipment
- Set of 9 collets in a carrying case with protective foam insert.
- Two collet nut wrenches – ER32 and ER25A.
- Touchscreen stylus with holder and safety tether.
- Power cable.
Technical Specifications
Model CORMAK DG20CNC
CNC-controlled axes X, Y, Z, C
End mill diameters 4–20 mm
Number of end mill cutting edges 2, 3, or 4
Corner radius end mill diameters 4–20 mm
Number of corner radius end mill cutting edges 2, 3, or 4
Corner radius range R0.5–3 mm
Ball nose end mill diameters 4–12 mm
Twist drill bit diameters 4–20 mm
Drill point angle 118–140°
Countersink diameters 4–12 mm
Countersink angle 90°
Spindle speed 3000 rpm
Feed system Automatic, with stepless speed adjustment
Coolant pump power 70 W
Motor power 2.5 kW
Power supply 230 V
Dimensions 900 × 640 × 930 mm
Weight 153 kg
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Lần cuối trực tuyến: Hôm nay
Đã đăng ký từ: 2020
565 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+48 25 63... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi
















