Trung tâm gia công dọc

CHIRON FZ08MT

This machine is equipped with a 2m LNS bar feeder, allowing it to fully automate the production of milled and turned parts directly from the bar stock.

On the main spindle, there is an E162 power chuck with a bar capacity of Ø10mm. The bar feeder itself is designed for material up to Ø65mm. Additionally, the machine is fitted with a pneumatically operated two-jaw chuck to allow complete secondary machining of components on the back side. Finished parts can then be removed by an integrated gripper and placed onto the conveyor belt.

The machine was retrofitted by CHIRON specifically for precious metal machining. This mainly means that seals within the machine have been reinforced, and the standard chip conveyor was replaced by a drawer unit with a fabric filter.

Other features:

Knedpfxow U Tbco Ad Rjd
- High-speed spindle with HSK 40 interface and high-pressure coolant (max. 40,000 rpm and up to 80 bar)
- Oil cooler and chip filtration system
- Kraft und Bauer fire suppression system with optical sensor
- Oil extraction system
- Renishaw probe
- Integrated tool breakage control/measurement
- Tool changer with 64 positions

Location: Medical device manufacturer

>>>> Collets and tool holders are included in the sale and are part of the listed price.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.