Sơ mi rơ moóc benBENALU
DA 24/EL 970 50m³
Sơ mi rơ moóc ben
BENALU
DA 24/EL 970 50m³
giá cố định chưa bao gồm thuế GTGT
16.870 €
Tình trạng
Đã qua sử dụng
Vị trí
Korschenbroich-Glehn 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
16.870 €
- Vị trí người bán:
- Dieselstr. 9, 41352 Korschenbroich-Glehn, Đức
Gọi điện
Chi tiết kỹ thuật
- Cấu hình trục:
- 3 trục
- Chiều dài không gian chứa hàng:
- 9.700 mm
- Chiều rộng khoang hàng:
- 2.350 mm
- Chiều cao khoang chứa hàng:
- 2.200 mm
- Thể tích khoang chứa hàng:
- 50 m³
- Đăng ký lần đầu:
- 02/2009
Chi tiết về đề nghị
- ID tin đăng:
- A20066010
- Số tham chiếu:
- 2430
- cập nhật:
- lần cuối vào ngày 25.09.2025
Mô tả
Chassis
ALU Frame
Two fully automatically welded T-profiles (width 200 mm), maximum stability with a mounted tipping shaft on the rear cross-member, chassis width approx. 1,200 mm.
Axles and Suspension, Disc Brake
BPW axle assemblies, 3 x 9 tons with air suspension, lift and lower valve, 1st axle automatically liftable, load gauge.
Dksdpfoxfn A Isx Ahvsu
Tyres and Wheels
6 wheels fitted with tyres size 385/65 R 22.5, approximately 50% tread remaining, on silver aluminium rims, 11.75×22.5 ET 0.
Landing Legs
Mechanical landing gear, 2x 20 t support load with swiveling foot.
Braking System
According to EU regulations, dual-circuit system as per EEG, spring-loaded parking brake acting on two axles, ABS system.
Electrical System
Compliant with German StVZO regulations with 2 five-chamber taillights (Aspöck type), 24-volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with lateral LED outline markers, 2 marker lamps, 2 separate LED reversing lights.
Tipping Body/Bin
Aluminium bin, sides with welded vertical aluminium profiles, floor approx. 6 mm aluminium, front wall in straight design, 4 mm with reinforcement profiles for the tipper cylinders, side walls 3 mm with external mounted U-reinforcement profiles, straight type double-wing rear door, combo door design (pendulum and door) in 1/2–1/2 layout with two grain chutes with water guard, frame extension at the grain chute for a grain sack.
Hydraulic System
Hydraulic cylinder mounted at the front wall with an operating pressure of approx. 150 bar, brand: Edbro, incl. approx. 2.5 m hydraulic hose and loose 1" half-coupling.
Accessories
6 plastic mudguards with 2 mud flaps, 3 m aluminium ladder, foldable underrun protection, lateral side protection, walkway at front wall with access ladder on left and right, 3 fixed bows, rolling tarpaulin with a central aluminium tube, rolling tarpaulin system, tarpaulin quality approx. 660 g/m², side tarpaulin closure with tensioning straps operable from the walkway, 2 wheel chocks, toolbox type 600, without spare wheel holder, etc.
Offer and images subject to change.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
ALU Frame
Two fully automatically welded T-profiles (width 200 mm), maximum stability with a mounted tipping shaft on the rear cross-member, chassis width approx. 1,200 mm.
Axles and Suspension, Disc Brake
BPW axle assemblies, 3 x 9 tons with air suspension, lift and lower valve, 1st axle automatically liftable, load gauge.
Dksdpfoxfn A Isx Ahvsu
Tyres and Wheels
6 wheels fitted with tyres size 385/65 R 22.5, approximately 50% tread remaining, on silver aluminium rims, 11.75×22.5 ET 0.
Landing Legs
Mechanical landing gear, 2x 20 t support load with swiveling foot.
Braking System
According to EU regulations, dual-circuit system as per EEG, spring-loaded parking brake acting on two axles, ABS system.
Electrical System
Compliant with German StVZO regulations with 2 five-chamber taillights (Aspöck type), 24-volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with lateral LED outline markers, 2 marker lamps, 2 separate LED reversing lights.
Tipping Body/Bin
Aluminium bin, sides with welded vertical aluminium profiles, floor approx. 6 mm aluminium, front wall in straight design, 4 mm with reinforcement profiles for the tipper cylinders, side walls 3 mm with external mounted U-reinforcement profiles, straight type double-wing rear door, combo door design (pendulum and door) in 1/2–1/2 layout with two grain chutes with water guard, frame extension at the grain chute for a grain sack.
Hydraulic System
Hydraulic cylinder mounted at the front wall with an operating pressure of approx. 150 bar, brand: Edbro, incl. approx. 2.5 m hydraulic hose and loose 1" half-coupling.
Accessories
6 plastic mudguards with 2 mud flaps, 3 m aluminium ladder, foldable underrun protection, lateral side protection, walkway at front wall with access ladder on left and right, 3 fixed bows, rolling tarpaulin with a central aluminium tube, rolling tarpaulin system, tarpaulin quality approx. 660 g/m², side tarpaulin closure with tensioning straps operable from the walkway, 2 wheel chocks, toolbox type 600, without spare wheel holder, etc.
Offer and images subject to change.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2002
Gửi yêu cầu
Điện thoại & Fax
+49 2182 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi