Xưởng cưa hoàn chỉnh (cố định)ALMAB
5000/4000
Xưởng cưa hoàn chỉnh (cố định)
ALMAB
5000/4000
Năm sản xuất
2002
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Schwäbisch Gmünd 

Thông tin về máy móc
- Tên máy:
- Xưởng cưa hoàn chỉnh (cố định)
- Nhà sản xuất:
- ALMAB
- Mô hình:
- 5000/4000
- Số máy:
- 001
- Năm sản xuất:
- 2002
- Tình trạng:
- đã qua sử dụng
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
- Vị trí:
- Egental 8, 73529 Schwäbisch Gmünd, Deutschland

Gọi điện
Chi tiết kỹ thuật
- Chiều dài cắt (tối đa):
- 5.000 mm
Chi tiết về đề nghị
- ID tin đăng:
- A22009028
- Số tham chiếu:
- Trimmer und Stapelanlagen
- Cập nhật:
- lần cuối vào ngày 29.07.2026
Mô tả
Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats:
Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick:
- Cross-transfer of boards with a 4-strand chain cross conveyor
- Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle
- Alignment roller conveyor
- Chain cross conveyor as a layer former
- Star turners and sorters before the trimmer
- Edge detection (ALFHA edger)
- Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates:
without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1
with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2
with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box
with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats
or waste cut - cut length 505 mm for the underlying vibration trough
- 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm
- Automatic lowering of finished packages and transfer to automatic strapping
- FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor
- ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs
- Control cabinets with Siemens components, SEW motors, Telco light barriers
For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours.
Rodpfx Anjy Uzhfowscf
The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems.
We can provide a process video via WhatsApp!
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick:
- Cross-transfer of boards with a 4-strand chain cross conveyor
- Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle
- Alignment roller conveyor
- Chain cross conveyor as a layer former
- Star turners and sorters before the trimmer
- Edge detection (ALFHA edger)
- Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates:
without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1
with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2
with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box
with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats
or waste cut - cut length 505 mm for the underlying vibration trough
- 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm
- Automatic lowering of finished packages and transfer to automatic strapping
- FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor
- ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs
- Control cabinets with Siemens components, SEW motors, Telco light barriers
For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours.
Rodpfx Anjy Uzhfowscf
The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems.
We can provide a process video via WhatsApp!
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2014
3 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 7332 ... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Quảng cáo nhỏ
Schwäbisch Gmünd
9.450 km
Hệ thống xếp chồng với máy cắt tỉa
ALMAB-Stapelanlage5000 / 4000
ALMAB-Stapelanlage5000 / 4000
Quảng cáo nhỏ
Ý
9.442 km
Trung tâm gia công có bàn điều khiển
BIESSEROVER C 6.40
BIESSEROVER C 6.40
Quảng cáo nhỏ
Miechucino
8.768 km
Máy cưa đa năng hai trục có cơ giới hóa
SocolestDAS 200
SocolestDAS 200
Quảng cáo nhỏ
Malé Výkleky
9.015 km
Máy băm gỗ
SG strojírny500
SG strojírny500
Quảng cáo nhỏ
Jüri
8.301 km
Máy cưa với đầu băm dăm
Veisto OYHewSaw R200
Veisto OYHewSaw R200
Quảng cáo nhỏ
Cegléd
8.762 km
Nhà máy cưa hoàn chỉnh
Costa Multiprisma
Costa Multiprisma
Quảng cáo nhỏ
Jonava
8.358 km
Máy xếp ván
Brettstapler
Brettstapler
Quảng cáo nhỏ
Pesaro
9.365 km
Máy mài cưa HSS
LOROCHSW
LOROCHSW
Quảng cáo nhỏ
Grünau im Almtal
9.180 km
Máy bóc vỏ gỗ
BalzBG90
BalzBG90
Quảng cáo nhỏ
Velké Karlovice
8.836 km
Máy móc sân gỗ
unknownML-35
unknownML-35
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi








































































































































