Hệ thống xếp chồng với máy cắt tỉaALMAB-Stapelanlage
5000 / 4000
Hệ thống xếp chồng với máy cắt tỉa
ALMAB-Stapelanlage
5000 / 4000
Năm sản xuất
2002
Tình trạng
Đã qua sử dụng
Vị trí
Schwäbisch Gmünd 

Thông tin về máy móc
- Nhà sản xuất:
- ALMAB-Stapelanlage
- Mô hình:
- 5000 / 4000
- Số máy:
- 001
- Năm sản xuất:
- 2002
- Tình trạng:
- đã qua sử dụng
Giá & Vị trí
- Vị trí:
- Egental 8, 73529 Schwäbisch Gmünd, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A22009123
- Cập nhật:
- lần cuối vào ngày 27.05.2026
Mô tả
Description
Offered is an automated edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and cross-cutting of stacking slats:
Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick:
Gjdpfx Ahsy Uzldoisiw
- Boards are transported laterally using a 4-strand chain cross conveyor
- Singulation inclined conveyor 6000 mm wide, 3000 mm inclined
- Alignment roller section
- Chain cross conveyor as a layer former
- Star infeed and inspection unit before the trimmer
- Edge detection (ALFHA-Edger)
- Trimmer with 11 saws in a 50.5 cm grid: The operator (seated) at the joystick assesses:
without re-trimming, 5000 mm into stacking machine 1, alternatively: without re-trimming, 4000 mm into stacking machine 1
with re-trimming, 4000 mm into stacking machine 2 with re-trimming, 3000 mm into stacking machine 2
with re-trimming of short lengths for discharge into a box with re-trimming of short lengths for discharge into a box
with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats
or waste cut – cutting length 505 mm for the underlying vibration chute
- 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm
- automatic lowering of finished packages and onward transport to the automatic strapping station
- FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor
- ALFHA control with Siemens S 7 – ensures perfect operation. Performance records / daily logs
- Control cabinets with Siemens components, SEW motors, Telco light barriers
For example, one employee was able to produce, package, and strap approximately 15,000 boards of size 4000/17 x 76 mm in 9 hours.
The system is still assembled, but the upstream chipping unit has already been dismantled. The system is therefore immediately available. It is very robustly built and has always operated smoothly and without any problems.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Offered is an automated edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and cross-cutting of stacking slats:
Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick:
Gjdpfx Ahsy Uzldoisiw
- Boards are transported laterally using a 4-strand chain cross conveyor
- Singulation inclined conveyor 6000 mm wide, 3000 mm inclined
- Alignment roller section
- Chain cross conveyor as a layer former
- Star infeed and inspection unit before the trimmer
- Edge detection (ALFHA-Edger)
- Trimmer with 11 saws in a 50.5 cm grid: The operator (seated) at the joystick assesses:
without re-trimming, 5000 mm into stacking machine 1, alternatively: without re-trimming, 4000 mm into stacking machine 1
with re-trimming, 4000 mm into stacking machine 2 with re-trimming, 3000 mm into stacking machine 2
with re-trimming of short lengths for discharge into a box with re-trimming of short lengths for discharge into a box
with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats
or waste cut – cutting length 505 mm for the underlying vibration chute
- 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm
- automatic lowering of finished packages and onward transport to the automatic strapping station
- FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor
- ALFHA control with Siemens S 7 – ensures perfect operation. Performance records / daily logs
- Control cabinets with Siemens components, SEW motors, Telco light barriers
For example, one employee was able to produce, package, and strap approximately 15,000 boards of size 4000/17 x 76 mm in 9 hours.
The system is still assembled, but the upstream chipping unit has already been dismantled. The system is therefore immediately available. It is very robustly built and has always operated smoothly and without any problems.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2014
3 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 7332 ... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Quảng cáo nhỏ
Gnesau
9.207 km
Máy bóc vỏ
NicholsonA6/35“ Rollenantrieb
NicholsonA6/35“ Rollenantrieb
Quảng cáo nhỏ
Roches-Prémarie-Andillé
10.205 km
Máy cưa bó gỗ
HOLTECSTIHL ES 121
HOLTECSTIHL ES 121
Quảng cáo nhỏ
Eislingen/Fils
9.462 km
Máy ép cột đơn - thủy lực
DUNKESHZ 40 (CE)
DUNKESHZ 40 (CE)
Quảng cáo nhỏ
Kehra
8.277 km
Xe xếp Paternoster
PRIBO NOT WEINIGPATERNOSTER STACKER Q1020
PRIBO NOT WEINIGPATERNOSTER STACKER Q1020
Quảng cáo nhỏ
Đức
9.576 km
WEINIG / DIMTER Opticut S90
WEINIG / DIMTEROpticut S90
WEINIG / DIMTEROpticut S90
Quảng cáo nhỏ
Cloppenburg
9.446 km
2007 Vollmer QWD 760
VollmerQWD 760
VollmerQWD 760
Quảng cáo nhỏ
Jüri
8.301 km
Máy cưa với đầu băm dăm
Veisto OYHewSaw R200
Veisto OYHewSaw R200
Quảng cáo nhỏ
Colonnella
9.311 km
Máy cắt
Trademak srlMammut System
Trademak srlMammut System
Quảng cáo nhỏ
Malé Výkleky
9.015 km
Máy băm gỗ
SG strojírny500
SG strojírny500
Quảng cáo nhỏ
Jonava
8.358 km
Máy xếp ván
Brettstapler
Brettstapler
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi

















































































































