Xưởng cưa hoàn chỉnh (cố định)

Wravor WRC 1050 FURNIR RIGTH

AUTOMATIC VENEER SPLICER Flat
Maximum prism width 700 mm
Maximum prism height 850 mm
Maximum prism length 4.2 m
Main drive motor 55 kW
Danfoss frequency converter for the main motor
Main wheels - cast iron - rubber in the middle
Main wheels - width 100 mm
Diameter of main wheels 1050
Lifting/lowering of the splicer spindle
Motor power for lifting/lowering 4 kW
Double-sided saw - PV 45, length 7470 mm, thickness 1.2 mm + stellite, width 140 mm
Electronic infinitely variable feed of the splicer forward and backward with Danfoss frequency switch 1.5 kW+W63
Digital setting of dimensions with automatic cutting program V-280 - veneer program
Hydraulic 40l tank with 13l pump and 4 kW electric motor
Complete hydraulic pipes
Automatic hydraulic tensioning of the saw + accumulator
Hydraulic guide for the saw blade on the left - linear veneer guide + automatic retraction below 100 mm
Hydraulic guide for the saw blade on the right - linear veneer guide + automatic retraction below 100 mm
Hydraulic arm for pushing lamellas back
Additional arm for adjusting lamella pushing
Separate control panel from the splicer
8-button 4-position joystick
8-button 2-position joystick + potentiometer
Laser 15 mW with holder
Camera on the splicer from the front (view of the prism) and start of cutting
Automatic water cooling of the saw blade up and down, with water filter, high-pressure water pump
Kdodpjy R Tcmsfx Ak Ujl
Opening for dust extraction - from the front + connection Ø 250 mm
Fan 5.5 kW + dust extraction pipe Ø 250 m
Central lubrication + automatic electric
Wider wheels for feed of the splicer forward and backward and additional protection of switches and track cleaner
Welded reinforced track 8500 mm
Hydraulic clamp with two cylinders and wedges for prisms 4 pcs
Hydraulic lifting/lowering of wedges 4 pcs
Hydraulic lifting with automatic roller for prism feed 4 pcs
Total lifter 1 pc
Hydraulic corner - centering device 3 pcs
Turner 3 pcs
Automatic output belt SILON 4 m with 1 m extension, + electric motor 1.5 kW - belt lifts and lowers automatically
Mechanical roller conveyor for veneer l=4000 mm
Inlet ramp (conveyor) for prisms