Hệ thống định lượng với băng tải

Viscotec 2VHD12-3D Hygienic Dispenser

Hygienic dosing pump for precise volumetric dosing of low to high-viscosity and particulate media.

Product-contact surfaces
Elastomers with FDA compliance certificate
Product-contact parts are autoclavable
Easy integration thanks to compact design
Overall length approx. 2300 mm
Nominal width approx. 350 mm
Total width with motor approx. 500 mm
Belt top edge adjustable from 980 to 1080 mm
Base frame made of robust square tube profiles
Version in stainless steel grade 1.4301
Double-sided knife edge, radius approx. 5 mm
Food-grade conveyor belt, make: Habasit, color: white
Central drive station
Gear motor by SEW included
Food-grade coating (depending on delivery time)
Speed adjustable via frequency inverter
(between 0.8 - 8 m/min)
Incl. adjustment frame for 5 dispensers by Viscotec
Adjustment is carried out using profiles and clamping units
Height adjustment is manual via clamping units; all dispensers are adjusted simultaneously. Dispensers can be finely adjusted individually via slotted holes, as needed.
Side adjustment, tilt, and adjustment in or against conveying direction can be set for each dispenser individually. No side guide included.
Incl. engineering
Incl. pre-assembly
Incl. installation of dispensers at our facility
Incl. test at our facility
Surface finish: Conveyor in stainless steel 1.4301, round tube frame for dispensers in stainless steel 1.4301, clamping units made of aluminum.
5 bars are transferred from an existing conveyor system onto our conveyor belt.
Control cabinet made of stainless steel 1.4301
Control and frequency inverter by Mitsubishi Electric
Setup:
Main switch, emergency stop switch, automatic on and off push buttons
Display for adjusting the speed in m/min and setting delay time for start signal for the dispensers
Sensors for bar detection (each bar is detected individually)
Sensors and signal for dispenser start (each dispenser receives its own start signal)
Communication interface with Viscotec
Emergency stop currently only available for our own machine.
Incl. control cabinet construction with 50% reserve capacity
Incl. high-grade sensors (distance photoelectric sensors, capable of measuring and evaluating distance)
Lhsdjxcvzaspfx Ab Isc
Incl. high-grade control system (hardware and software can be expanded at any time without replacing the controller)
Incl. HMI (display), approx. 7"
Incl. E-plan
Incl. program
Incl. in-house test (interface test with Viscotec)
Surface finish: control cabinet entirely of stainless steel, sensors made of stainless steel and FDA approved.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.