Máy tạo hình bánh răngVEB MODUL ZFWZ 3150/3
ZFWZ 3150/3
Máy tạo hình bánh răng
VEB MODUL ZFWZ 3150/3
ZFWZ 3150/3
Năm sản xuất
1985
Tình trạng
Đã qua sử dụng
(chức năng bị giới hạn)
Vị trí
Niš 

Dữ liệu cơ bản
- Tên máy:
- Máy tạo hình bánh răng
- Nhà sản xuất:
- VEB MODUL ZFWZ 3150/3
- Mô hình:
- ZFWZ 3150/3
- Năm sản xuất:
- 1985
- Tình trạng:
- đã qua sử dụng
- Tính năng hoạt động:
- chức năng bị giới hạn
Giá & Vị trí
- Vị trí:
- Durmitorska 77A, 18000 Nis, Srbija

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A23337896
- Số tham chiếu:
- ZFW
- Cập nhật:
- lần cuối vào ngày 16.11.2026
Mô tả
# MODUL ZFWZ 3150/3 – Heavy-Duty Gear Hobbing Machine
Manufacturer: VEB MODUL, Germany (GDR)
Model: ZFWZ 3150/3
Serial Number: 323204
Machine Type: Heavy-Duty Gear Hobbing Machine
Hedpfxj Akh Sko Ab Tefp
## TECHNICAL SPECIFICATIONS
- Maximum Gear Diameter: 3,150 mm
- Minimum Gear Diameter: 500 mm
- Max. Diameter with External Support: 1,600 mm
- Maximum Gear Module: 30 mm
- Maximum Gear Face Width: 1,000 mm
- Maximum Helix Angle: 45°
- Rotary Table Diameter: 2,400 mm
- Table Centre Bore: 500 mm
- Table Bore Depth: 1,100 mm
- Maximum Workpiece Weight: 30,000 kg
- Maximum Hob Diameter: 350 mm
- Maximum Hob Length: 440 mm
- Tangential Hob Travel: 500 mm
- Vertical Distance: 700–1,900 mm
- Horizontal Distance: 300–1,800 mm
- Axial Feed: 0–16 mm/rev
- Radial Feed: 0–7.1 mm/rev
- Tangential Feed: 0–8 mm/rev
- Connected Load: 75 kW
- Power Supply: 380 V / 50 Hz / 3-Phase
- Machine Weight: 50,000 kg
Approximate Dimensions:
6,785 × 5,400 × 4,820 mm (L × W × H)
## MACHINE CONDITION
The machine is mechanically fully functional and complete. The original electrical system, including the electrical cabinets and control equipment, is also complete.
However, the machine has not been operated for over 15 years. Therefore, the current condition of the electrical system remains untested. Electrical inspection and recommissioning may be necessary before operation.
The machine is available for inspection by appointment.
## DISMANTLING & TRANSPORT
Professional dismantling is INCLUDED in the selling price.
Due to its size and weight, road transportation requires a specialised heavy-duty truck or low-bed trailer.
For overseas shipping, open-top or flat-rack containers, or a suitable heavy-lift shipping solution, may be required depending on the dimensions and weight of the dismantled components.
We can assist with transport planning and international shipping arrangements.
## ABOUT US
Reparatur von Maschinen – Niš, Serbia
We are a professional dealer with 25 years of experience in buying and selling used metalworking machinery and heavy industrial equipment.
Our company operates its own 1,500 m² machinery warehouse in Niš, Serbia.
We specialise in heavy-duty machine tools, gear manufacturing equipment, lathes, boring machines, milling machines, grinding machines, presses and complete production lines.
We offer professional service, transparent communication and reliable international cooperation.
Contact: Miloš Milosavljević
Additional photos, technical information and inspection arrangements are available upon request.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Manufacturer: VEB MODUL, Germany (GDR)
Model: ZFWZ 3150/3
Serial Number: 323204
Machine Type: Heavy-Duty Gear Hobbing Machine
Hedpfxj Akh Sko Ab Tefp
## TECHNICAL SPECIFICATIONS
- Maximum Gear Diameter: 3,150 mm
- Minimum Gear Diameter: 500 mm
- Max. Diameter with External Support: 1,600 mm
- Maximum Gear Module: 30 mm
- Maximum Gear Face Width: 1,000 mm
- Maximum Helix Angle: 45°
- Rotary Table Diameter: 2,400 mm
- Table Centre Bore: 500 mm
- Table Bore Depth: 1,100 mm
- Maximum Workpiece Weight: 30,000 kg
- Maximum Hob Diameter: 350 mm
- Maximum Hob Length: 440 mm
- Tangential Hob Travel: 500 mm
- Vertical Distance: 700–1,900 mm
- Horizontal Distance: 300–1,800 mm
- Axial Feed: 0–16 mm/rev
- Radial Feed: 0–7.1 mm/rev
- Tangential Feed: 0–8 mm/rev
- Connected Load: 75 kW
- Power Supply: 380 V / 50 Hz / 3-Phase
- Machine Weight: 50,000 kg
Approximate Dimensions:
6,785 × 5,400 × 4,820 mm (L × W × H)
## MACHINE CONDITION
The machine is mechanically fully functional and complete. The original electrical system, including the electrical cabinets and control equipment, is also complete.
However, the machine has not been operated for over 15 years. Therefore, the current condition of the electrical system remains untested. Electrical inspection and recommissioning may be necessary before operation.
The machine is available for inspection by appointment.
## DISMANTLING & TRANSPORT
Professional dismantling is INCLUDED in the selling price.
Due to its size and weight, road transportation requires a specialised heavy-duty truck or low-bed trailer.
For overseas shipping, open-top or flat-rack containers, or a suitable heavy-lift shipping solution, may be required depending on the dimensions and weight of the dismantled components.
We can assist with transport planning and international shipping arrangements.
## ABOUT US
Reparatur von Maschinen – Niš, Serbia
We are a professional dealer with 25 years of experience in buying and selling used metalworking machinery and heavy industrial equipment.
Our company operates its own 1,500 m² machinery warehouse in Niš, Serbia.
We specialise in heavy-duty machine tools, gear manufacturing equipment, lathes, boring machines, milling machines, grinding machines, presses and complete production lines.
We offer professional service, transparent communication and reliable international cooperation.
Contact: Miloš Milosavljević
Additional photos, technical information and inspection arrangements are available upon request.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Lần truy cập cuối: tuần trước
Đã đăng ký từ: 2022
6 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+381 63 4... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi






















