Máy mài cạnh Delle Vedove LBK 2Superfici Elmag
LBK 2
Máy mài cạnh Delle Vedove LBK 2
Superfici Elmag
LBK 2
năm sản xuất
2002
Tình trạng
Đã qua sử dụng
Vị trí
Đức 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Máy mài cạnh Delle Vedove LBK 2
- nhà sản xuất:
- Superfici Elmag
- Mô hình:
- LBK 2
- Số máy:
- 02062
- năm sản xuất:
- 2002
- Tình trạng:
- đã qua sử dụng
Giá & Vị trí
- Vị trí:
- D - Nordrhein-Westfalen
Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A19286536
- Số tham chiếu:
- 3317636
- cập nhật:
- lần cuối vào ngày 03.06.2025
Mô tả
The right and left edges are sanded in a single pass.
There are 2 brush sanding heads installed on both the left and right sides.
Process:
1. The parts are conveyed to the right side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction.
2. The right edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt.
3. The parts are conveyed to the left side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction.
4. The left edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt.
Fsdjwpwukspfx Aczepn
- Manufacturer: Supferfici, Delle Vedove
- Part width: approx. 1,400mm
- Height of sanding head: 80mm
- Sanding height: approx. 60mm
- Length: approx. 8,800mm
- Working height: 880mm
- Year of manufacture: 2002
- A new Siemens S7-1200 will be installed for material control.
- Location: in stock
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
There are 2 brush sanding heads installed on both the left and right sides.
Process:
1. The parts are conveyed to the right side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction.
2. The right edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt.
3. The parts are conveyed to the left side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction.
4. The left edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt.
Fsdjwpwukspfx Aczepn
- Manufacturer: Supferfici, Delle Vedove
- Part width: approx. 1,400mm
- Height of sanding head: 80mm
- Sanding height: approx. 60mm
- Length: approx. 8,800mm
- Working height: 880mm
- Year of manufacture: 2002
- A new Siemens S7-1200 will be installed for material control.
- Location: in stock
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2002
Gửi yêu cầu
Điện thoại & Fax
+49 5235 ... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
quảng cáo nhỏ

9.517 km
Máy mài cạnh Delle Vedove LBK 2
Superfici ElmagLBK 2
Superfici ElmagLBK 2
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi