Sơ mi rơ moóc sàn di động

STAS 13.50 "WF 87 "FarmStar" GH ca. 3,85m GMP-HCCP

Chassis
Dusdpfx Aajxuy I Io Nen
Manufactured in self-supporting aluminium construction with corresponding reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, 140 mm frame height! (max. 39t)

Axles and Suspension “Disc brakes 22.5”
Jost axle assemblies, 3 x 9 tonnes with DC air suspension, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle separately liftable with starting aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension

Tyres and wheels
6 wheels with tyres size 385/65 R 22.5 approx. 50% remaining tread,
on Alcoa aluminium rims, satin finish, 11.75x22.5 ET120

Landing gears
Aluminium drop support legs, manufacturer Alu Leg, with 2x10t support load, pivoting feet used for air suspension

Braking system
In accordance with ECE regulation, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring brake system on two axles operated from rear, aluminium air reservoir system, premium modulator

Electrical system
According to STVZO guidelines, with 2 LED five-chamber lights, Aspöck Europoint III type, integrated in the aluminium rear end, 24 volt system with 1x 15-pin and 2x 7-pin sockets, with side
LED outline marker lights, 2 separate LED work lights at rear, 2 LED work lights at the side at landing gear height, 1 LED work light inside, front left, operable from outside

Body/Tipper body "Body fully welded inside"
Front wall load 17,250 daN, rear and side walls 10,250/13,400 daN. Aluminium tipper body, side walls made of 30 mm thick aluminium plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper chords, interior plank profiles fully welded!! Floor as moving floor system laid on 140 mm aluminium cross members, closely spaced (approx. 350 mm), aluminium front wall with 600 mm plank profile, 2-3 mm strong, straight version, special aluminium corner profiles in
beveled design, smooth tailgate straight version with 2 aluminium double-wing doors, 50/30 mm strong, with 4 locking rods fixed in welded aluminium rear frame in Teflon and stainless steel bearings. Moveable aluminium wall suspended from the reinforced upper aluminium chord with “Kevlar sheet” for complete discharge, lateral brush seal and additional Kevlar sheet. Integrated grain funnel with cover plate, operable from outside, with viewing window at rear left. 2 sample slides in the rear doors

Hydraulic system "Cargo Floor" 24-slat system
Moving floor system in the floor with hydraulically operated aluminium profiles on aluminium box sections with approx. 880 PE-HD sliders, floor approx. 6 mm smooth, hydraulics with approx. 200 mm working stroke. Fixed halves at front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with to-be-specified size and design. Working pressure 190–max. 240 bar, aluminium end pieces welded into floor, operation at rear left with remote control in a lockable waterproof box, no hydraulic hoses

Accessories
PVC mudguards with rubber splash aprons, aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 toolbox approx. 800x460x430 mm plastic, approx. 3.7 m aluminium ladder, tarpaulin 680 g/m² quality with rolling tarpaulin system including side quick-release locking bar and tension strap at front wall, catwalk at front wall with double ascent, 3

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.