Sơ mi rơ moóc sàn di động

STAS 10.50 "WF 60 FarmStar" 60m³ (Vermietung möglich)

Chassis manufactured in self-supporting ALU (aluminum) construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons)

Axles and Suspension "Disc Brake 22.5":
Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake lining wear indicator (BVA) for display in the tractor unit (without tractor head equipment), 1st and 3rd axle separately liftable with drive-off aid (without tractor head equipment), 3rd axle additionally with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors

Tires and Wheels:
6 wheels with tires size 385/65 R 22.5, brand as per manufacturer’s choice, Alcoa aluminum rims DuraBright 11.75x22.5 ET 120, king pin bolted into a 10 mm thick plate

Landing Legs:
Aluminum drop landing legs, 2 x 10 tons support load, pivot feet used for air suspension

Brake System:
According to E.G. standard, dual-circuit brake system, EBS E-system Wabco with RSS system (Roll Stability Support), spring-actuated parking brake active on two axles, operated at the rear, aluminum air reservoir system, premium modulator

Electrical System:
Hnedpfjfakkcsx Afxoi
According to STVZO guidelines, with 2 LED five-chamber taillights type Aspöck Europoint LED integrated in ALU rear end, 24 V system with 1x 5-pin & 2x 7-pin sockets, with LED side marker lights, 2 separate LED work lights at the rear, 2 LED work lights at 1st landing leg height, 1 inside left front LED work light, operable from outside

Body/Bodywork "Fully Welded Inside Construction":
Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn aluminum body, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, fully welded with lower and upper flange, inside fully welded plank profiles, floor as moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m2, crossbeams closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile 2-3 mm thick in straight design, special angled ALU corner profiles, smooth flat rear wall with 2 ALU swing doors 50/30 mm thick, 4 locking rods with welded-in ALU rear frame mounted in Teflon and stainless steel bearings, continuous ALU wall suspended from reinforced ALU top rail with "Kevlar tarpaulin" for complete emptying, lateral brush seals and additional Kevlar side tarpaulin, integrated discharge funnel with hinged floor closure flap, operable from outside left rear, inspection window rear left, 1 sample slide per rear door (2 pcs.), service door front left

Hydraulic System:
"Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 670 PE-HD sliding blocks, approx. 6 mm floor thickness, hydraulic stroke approx. 200 mm, fixed end at front wall, separate hydraulic line connection under the vehicle with fixed halves, line size NW 21, fixed halves with yet to be specified size and design, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electric operation rear left with cable remote in lockable waterproof box

Accessories:
PVC mudguards with rubber splash guards, ALU spare wheel holder, foldable side ALU underrun protection, 1 toolbox approx. 800x460x430 mm plastic, approx. 3.7 m ALU ladder, roll tarp 680 gr./m2 quality with rolling tarp system incl. side ...

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.