Máy phay định hình SCM Superset NTE (2008)

SCM Superset NTE

Profiling machine
Manufacturer: SCM
Type: Superset NTE
Year of construction: 2008
Technical data
- Touchscreen control for the machine with 6 spindles + UNIWAVE
- Spindle speed 8,300 rpm
- Working width 240 mm, working height 125 mm, electronic
- Touchscreen control MOBILE 10
- HSK 85S
- SPINDLE QUICK-CHANGE SYSTEM T-SET
- QUICK-CLAMPING DEVICE for tools
- 7 shafts as a UNIWAVE, suitable for separating
- 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm
- Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup)
- Manual pump for lubricating the working table
- WITH machining tool
- Min. working width (finished size) mm 15
- Max. working width (finished size) mm 240
- Min. length of the individual workpiece mm 450
- Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4
- Motor power surfacing spindle kW 7.5, quick-clamping device
- Motor power vertical spindle right kW 7.5, Powerlock HSK 85
- Motor power vertical spindle left kW 7.5, Powerlock HSK 85
- Motor power upper horizontal spindle kW 7.5, quick-clamping device
- Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85
- Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85
- Motor power universal spindle kW 7.5, quick-clamping device
- Spindle speed rpm 6000/8300
- Spindle diameter mm 40
- Spindle receiving length vertical mm 220
- Spindle receiving length horizontal mm 250
- Axial adjustment range of the vertical spindles standard mm 75
- Axial adjustment range of the horizontal spindles standard mm 45 min. max.
- Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max.
- Sweeping circle diameter of the profiling spindles mm 100/200
Dksdszuzfhopfx Agvou
- Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15
- Diameter of the spindle cylinders mm 120
- Diameter of the feed rollers mm 140
- Infeed table length mm 2500
- Adjustment range of the infeed table and infeed fence 10 mm
- Motor-driven feed roller in the outfeed table
- Manual central lubrication
- On/off switch for the feed unit before the surfacing cutter
- Horizontal pressure pads before the surfacing cutter with on/off switch
- Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter
- Pneumatic pressure shoes in front of the upper horizontal spindles
- Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel
- 2 feed rollers 140 x 25 per feed shaft
- Lighting inside the protective cover
- Extraction capacity min. 10,443 m3/h
- Including extraction hood!
- Including Powerlock mounting bracket
- All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included.
- Spare parts catalog: Complete, 8 PDF catalogs available

Note: Not all tools shown are part of this offer.
Note:
The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.