Baler

PAAL Likon 700

Basic equipment and technical data:
Main parts of the press 1 automatic channel press PAAL LIKON 700G/S
1 automatic strapping device 1 hydraulic system
1 electric control
Press performance
Pressing force at approx. 315 bar: 198 t (1,940 kN)
Specific press force : 160 N/cm3
Volume output at idle : 725 m3/hour
Volume capacity 35 kg/m3 : 485 m3/hour
Drive power motors : 2 x 55 kW
Pump delivery rate : 2 x 420 l/min
Throughput based on bulk density:
• Density 15 kg/m3 (e.g. film) 6 - 15 t/hour
• Density 35 kg/m3 (e.g. mixed department store) 13 - 33 t/hour
• Density 60 kg/m3 (e.g. mixed paper) 21 - 54 t/hour
• Density 80 kg/m3 (e.g. mixed paper) 26 - 69 t/hour
• Density 100 kg/m3 (e.g. commercial waste) 32 - 80 t/hour

Dimensions of the press
Length, width, height : see drawing
Channel cross-section (h x w) : 110 x 110 cm
Dodpfxjxfmcaj Ahveku
Filling opening (L x W) : 200 x 102 cm
Filling opening : 3.45 m
Number of binding wires : 5
Bale weight : up to 1300 kg
Bale dimensions : 110 x 110 cm
Bale length : adjustable

Hydraulics
Hydraulic oil tank capacity : 2100 l
System pressure : 315 bar
Machine weight : approx. 44 t
Operating voltage : 3 x 380-420 VAC / 50 Hz / N / PE
Year of manufacture : 2012 year
Operating hours : only 7,145 hours
Hardoxx steel plate coating in press chamber
Press feed conveyor belt PAAL chain conveyor belt type KES-1900

Technical data:
Conveyor width : approx. 1,900 mm
Centre distance : approx. 16,000 mm
Belt route : approx. 3.75 m horizontal under floor, then rising at an angle of 30° over a length of approx. 9.18 m, falling at an angle of less than 20° over the remaining length and conveying into the baling press
Conveyor belt speed : 0.29 m/sec.
Conveyor belt drive power : 5.5 kW