Thiết bị phun cátOliver Fritz GmbH & Co. KG
Strahlmittelförderschnecke 5m
Thiết bị phun cát
Oliver Fritz GmbH & Co. KG
Strahlmittelförderschnecke 5m
Năm sản xuất
2026
Tình trạng
Mới
Vị trí
Großenlüder 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Thiết bị phun cát
- Nhà sản xuất:
- Oliver Fritz GmbH & Co. KG
- Mô hình:
- Strahlmittelförderschnecke 5m
- Năm sản xuất:
- 2026
- Tình trạng:
- mới
Giá & Vị trí
- Vị trí:
- Industriestraße 5-7, 36137 Großenlüder, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A21354307
- Cập nhật:
- lần cuối vào ngày 02.03.2026
Mô tả
Abrasive Conveyor Screw 5m with Dosing Hood
For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift)
- 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights.
- Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe.
- Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning.
- Hall cleaning takes only 10 minutes using a forklift or wheel loader.
- Very low maintenance and repair costs compared to a complete conveyor floor.
Rodpfjynz Idsx Ab Ijp
- Particularly suitable for very heavy workpieces.
- Lower acquisition costs compared to a full-area conveyor floor.
- Reduced foundation costs compared to a full-area conveyor floor.
- Can be pushed across the full hall width as opposed to a sweep pit.
- Very high warranty period.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift)
- 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights.
- Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe.
- Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning.
- Hall cleaning takes only 10 minutes using a forklift or wheel loader.
- Very low maintenance and repair costs compared to a complete conveyor floor.
Rodpfjynz Idsx Ab Ijp
- Particularly suitable for very heavy workpieces.
- Lower acquisition costs compared to a full-area conveyor floor.
- Reduced foundation costs compared to a full-area conveyor floor.
- Can be pushed across the full hall width as opposed to a sweep pit.
- Very high warranty period.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2017
Gửi yêu cầu
Điện thoại & Fax
+49 6648 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi






