Máy đùn nhựa tái chếNext Generation Recyclingmaschinen GmbH
F:Gran 145-20
Máy đùn nhựa tái chế
Next Generation Recyclingmaschinen GmbH
F:Gran 145-20
EXW giá cố định chưa bao gồm thuế GTGT
150.000 €
Năm sản xuất
2013
Tình trạng
Đã qua sử dụng
(chức năng bị giới hạn)
Vị trí
Bergen op Zoom 

Thông tin về máy móc
- Tên máy:
- Máy đùn nhựa tái chế
- Nhà sản xuất:
- Next Generation Recyclingmaschinen GmbH
- Mô hình:
- F:Gran 145-20
- Số máy:
- 12090
- Năm sản xuất:
- 2013
- Tình trạng:
- cần sửa chữa (đã qua sử dụng)
- Tính năng hoạt động:
- chức năng bị giới hạn
- Giờ vận hành:
- 7.700 h
Giá & Vị trí
EXW giá cố định chưa bao gồm thuế GTGT
150.000 €
- Vị trí:
- Bergen op Zoom, Hà Lan

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A22402837
- Số tham chiếu:
- Z032
- Cập nhật:
- lần cuối vào ngày 23.07.2026
Mô tả
This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago.
Lhedpfx Ajznz Ezoklji
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Vacuum 2:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Lhedpfx Ajznz Ezoklji
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Vacuum 2:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Tài liệu
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Trực tuyến lần cuối: Hôm qua
Đã đăng ký từ: 2026
15 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+43 660 2... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi


























