Rơ moóc sơ mi

Auflieger mit Fassi Kran Wechselsystem F255A.24

Wiese Construction Material Semi-Trailer with Interchangeable System F255, Fassi Loading Crane

Gross Vehicle Weight: 12,000 kg
Aggregate Weight: 27,000 kg
Length of loading platform: approx. 10,050 mm
Overall length: approx. 10,600 mm
Width internally: 2,480 mm
Overall width: 2,550 mm

Kingpin
1 position with 2" kingpin
Coupling height
in horizontal position approx. 1,160 mm
Top edge of main beam (without floor)
approx. 1,380 mm
Loading height:
approx. 1,410 mm

Tie-down eye outer frame D=30 mm with lashing rail in the slope
(160mm high/30mm floor lowering/4mm wall thickness),
Main beam spacing
980mm (center/center) - 1130mm (outer edge/outer edge)
Axles
3 axles, each with a load capacity of 9,000 kg
Manufacturer: SAF with disc brake D=430 mm
Track: 2,040 mm
ABS: 1 axle sensed
Axle spacing: approx. 1,510 mm / approx. 1,510 mm
Suspension
Original SAF air suspension, with lifting/lowering valve
with safety ropes
Axle lift
Axle lift 1st axle, automatically load-dependent as an aid for starting
can be switched via a button in the cab
Steering
Mechanical forced steering on axles 2 + 3
Can be operated via RADIO, VSE-Advance Steering

Braking system
2-line Wabco compressed air braking system according to EU directives
71/320/EEC and subsequent amendments with:
EBS/ABS 2S/2M with RSS function (Roll Stability Support)
and 7-pole socket
1x ISO coupling head yellow
1x ISO coupling head red
Spring brake parking brake on 2 axles
all mounted with quick couplings
Aluminum air reservoir
Air system
Compressed air system with:
1x lifting/lowering valve
1x level control valve
Aluminum air reservoir
all mounted with quick couplings
Automatic lowering of the air suspension during crane operation
Tires
6 pcs. Type: 385/65 R22.5"
Manufacturer: at the manufacturer's choice
Tire pressure monitoring system on 6 tires,
for display in the cab
Rims
Lhodpfo Ad Sv Hjx Ahqsn
6x steel rim 11.75x22.5", 10-hole,
center-centered, offset: 120mm,
Support system
Mechanical support legs with T-pendulum foot, permissible lifting load: 2x 12,000kg
operable from 1 side, 2 speeds
Manufacturer:
at the manufacturer's choice
Wheel covers + mud flaps
6x plastic wheel covers half-shells
Fender mounting reinforced with band steel
Note: Fender on steering axle 3 inside with cut-out

Lighting system
24V lighting system according to EU directives 76/756/EEC and subsequent amendments with:
LED rear lights
Side marker lights
License plate lighting
LED side marker lights with flashing function
2x7-pole and 1x 15-pole socket connected according to EU standard
Rear lights mounted in reinforced a
light carrier = tested rear underrun protection
all necessary markings
Additional installation:
Electrical connection for crane control prepared according to specifications!
Protective equipment
Design of side impact protection and rear underrun protection
made of aluminum according to EU directives
Floor
OKULEN floor 32 mm

Body
Straight front wall, 1,200mm high, welded,
consisting of 4x steel profiles,
welded to the front plate with an aluminum hollow profile as a filling
Inside a wear plate 625mm high, steel galvanized
On both sides Kinnegrip stake pocket K20/1,100mm high for free loading
Straight rear wall, 1,100mm high, welded, consisting
of 4x steel profiles, welded to the rear plate and aluminum
hollow profile as a filling
Inside a wear plate 625mm high, steel galvanized
On both sides Kinnegrip stake pocket K20/1,100mm high for free loading,
2x3 Aluminum side walls 1,100mm, foldable and lowerable
in the rear side wall

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.