Bình áp suất 10.000 lít điều khiển nhiệt độ, chưa qua sử dụng, bằng V2A cho chất lỏng đông lạnh.
9162
Bình áp suất 10.000 lít điều khiển nhiệt độ, chưa qua sử dụng, bằng V2A cho chất lỏng đông lạnh.
9162
giá cố định chưa bao gồm thuế GTGT
15.500 €
năm sản xuất
2010
Tình trạng
Đã qua sử dụng
Vị trí
Bremen 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Bình áp suất 10.000 lít điều khiển nhiệt độ, chưa qua sử dụng, bằng V2A cho chất lỏng đông lạnh.
- Mô hình:
- 9162
- Năm sản xuất:
- 2010
- Tình trạng:
- đã qua sử dụng
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
15.500 €
- Vị trí:
- Bremen

Gọi điện
Chi tiết kỹ thuật
- Dung tích thùng chứa:
- 10.000 l
Chi tiết về đề nghị
- ID tin đăng:
- A20350795
- Số tham chiếu:
- 9162
- Cập nhật:
- lần cuối vào ngày 24.10.2025
Mô tả
GENERAL
Construction type: upright
Year of manufacture: 2010
Remarks: Tank was designed for an LNG filling station but was never put into operation; a tube bundle is installed inside above the flange, which can be used for thermal control; 2 transport saddles made of steel (Fe) are available; a section of insulation and the insulation jacket is missing in the upper part of the cylinder;
External diameter: 1,850 mm
Overall width: 2,300 mm
Overall height: 7,700 mm
Heating/cooling: available
Insulation: available
Max. overpressure: 18.0 bar
Support type: on feet
Location: Bremen
Technical documentation: drawing, various documents, operating manual
Name plate:
Volume: 10,000 liters
Product-contacting material: V2A 1.4301 (AISI304)
Condition: unused
Cylindrical height: 5,239 mm
TANK
Max. operating temperature (tank)/°C: 50 °C
Number of feet: 3 pcs
Dwsdpoxqb Injfx Aglsf
HEATING/COOLING JACKET
Internal tempering: full pipe coil
INSULATION
Insulation jacket: bolted
Insulation jacket material: stainless steel
EQUIPMENT
Note: minor adhesion, pressure marks on the cylinder
MATERIAL SPECIFICATION
Foot material: steel
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Construction type: upright
Year of manufacture: 2010
Remarks: Tank was designed for an LNG filling station but was never put into operation; a tube bundle is installed inside above the flange, which can be used for thermal control; 2 transport saddles made of steel (Fe) are available; a section of insulation and the insulation jacket is missing in the upper part of the cylinder;
External diameter: 1,850 mm
Overall width: 2,300 mm
Overall height: 7,700 mm
Heating/cooling: available
Insulation: available
Max. overpressure: 18.0 bar
Support type: on feet
Location: Bremen
Technical documentation: drawing, various documents, operating manual
Name plate:
Volume: 10,000 liters
Product-contacting material: V2A 1.4301 (AISI304)
Condition: unused
Cylindrical height: 5,239 mm
TANK
Max. operating temperature (tank)/°C: 50 °C
Number of feet: 3 pcs
Dwsdpoxqb Injfx Aglsf
HEATING/COOLING JACKET
Internal tempering: full pipe coil
INSULATION
Insulation jacket: bolted
Insulation jacket material: stainless steel
EQUIPMENT
Note: minor adhesion, pressure marks on the cylinder
MATERIAL SPECIFICATION
Foot material: steel
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2019
Gửi yêu cầu
Điện thoại & Fax
+49 421 5... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi























