Động cơ xăngLiebherr
G9512/L12V21
Động cơ xăng
Liebherr
G9512/L12V21
Tình trạng
Đã qua sử dụng
Vị trí
Merkendorf 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
Giá & Vị trí
- Vị trí:
- Energiepark 2, 91732 Merkendorf, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A20759152
- Cập nhật:
- lần cuối vào ngày 15.12.2025
Mô tả
Major Overhaul Gas Engine
The following work is carried out during the major overhaul:
Replacement of all wear parts, bearings, filters, and seals. Renewal or reconditioning of:
- Reconditioning of crankshaft and crankcase
- Cylinder liners, piston rings (pistons as required),
- Sensors
- Water pump
- Starter motor
- Cylinder heads
- Spark plugs
- Injectors and injection lines
- Thermostat housing
- Connecting rod and cylinder head bolts
- Oil modules
- Viscous damper
The following components are also inspected and replaced if necessary:
- Rocker arms
- Connecting rods
- Lubricating oil pump
Hfjdsx Huxujpfx Aater
- Gears
The scope of delivery is defined as follows:
-with starter motor
-with cylinder heads
-without exhaust manifolds or elbows
-without turbocharger
-without charge air cooler
-without gas mixer
-without throttle valve
-without engine management and ignition system
-without charge air piping
The engine is equipped with the following sensors:
-Engine oil temperature sensor
-Engine oil pressure sensor
-Speed sensors (2 units)
-Ignition pulse generator
This is a factory-refurbished product.
Note: Refurbished parts are those that, in addition to a functional test, have been inspected for visible defects; any defective parts have been repaired or replaced.
All replacement engines supplied by or through agriKomp GmbH require the return of an identical old engine. In the event that the exchange unit is not returned within 8 weeks from the exchange date, a surcharge of €10,000 will be invoiced.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
The following work is carried out during the major overhaul:
Replacement of all wear parts, bearings, filters, and seals. Renewal or reconditioning of:
- Reconditioning of crankshaft and crankcase
- Cylinder liners, piston rings (pistons as required),
- Sensors
- Water pump
- Starter motor
- Cylinder heads
- Spark plugs
- Injectors and injection lines
- Thermostat housing
- Connecting rod and cylinder head bolts
- Oil modules
- Viscous damper
The following components are also inspected and replaced if necessary:
- Rocker arms
- Connecting rods
- Lubricating oil pump
Hfjdsx Huxujpfx Aater
- Gears
The scope of delivery is defined as follows:
-with starter motor
-with cylinder heads
-without exhaust manifolds or elbows
-without turbocharger
-without charge air cooler
-without gas mixer
-without throttle valve
-without engine management and ignition system
-without charge air piping
The engine is equipped with the following sensors:
-Engine oil temperature sensor
-Engine oil pressure sensor
-Speed sensors (2 units)
-Ignition pulse generator
This is a factory-refurbished product.
Note: Refurbished parts are those that, in addition to a functional test, have been inspected for visible defects; any defective parts have been repaired or replaced.
All replacement engines supplied by or through agriKomp GmbH require the return of an identical old engine. In the event that the exchange unit is not returned within 8 weeks from the exchange date, a surcharge of €10,000 will be invoiced.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Gửi yêu cầu
Điện thoại & Fax
+49 9826 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi
