Máy ép phun nhựa

KraussMaffei KM 1100-12000 MX

KRAUSS MAFFEI Injection Moulding Machine KM 1100-12000 MX

Basic Information

Manufacturer: Krauss Maffei
Model: KM 1100-12000 MX
Year of manufacture: 2008
Control system: MC5
Control panel: color monitor integrated with the control console
Interfaces: 3 USB ports

The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for processing thermoplastics, featuring abrasion protection.

Clamping Unit
Godpfxoyugfze Agnjip

Clamping force: 11,000 kN
Mold opening force: 770 kN
Platen dimensions (horizontal × vertical): 2,210 × 1,910 mm
Tie bar spacing (horizontal × vertical): 1,550 × 1,250 mm
Mold opening stroke: 2,000 mm
Minimum mold height: 600 mm
Maximum mold height: 1,200 mm
Platen opening stroke: 2,600 mm
Ejector stroke: 300 mm
Ejector force: 220 / 110 kN

Injection Unit

Screw diameter: 120 mm
Maximum injection pressure: 1,758 bar
Injection volume: 6,786 cm³
Shot weight (PS): 6,175 g
Screw speed (standard / option): 103 / 145 rpm
Injection rate (standard): 1,118 cm³/s
Injection rate (accumulator): 1,696 cm³/s

Electrical-Hydraulic Equipment

Rated drive motor power: 132 kW
Installed heating capacity: 82 kW
Number of barrel heating zones: 7
Dry cycle rate (EUROMAP): 802 cycles/h
Hydraulic oil tank capacity: 2,440 l

Machine Dimensions & Weight

Net weight (with control cabinet): 73 t
Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m

Optional ESS (Energy Saving Systems)

The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection molding machines.

The system controls the hydraulic pump motor via a frequency inverter, adjusting the motor speed to the current production cycle requirements.

Key Benefits:
- Reduction in electricity consumption by up to 30%
- Hydraulic pump servo drive technology
- World-class, proven technology used in the plastics processing industry
- Reduced energy losses during idle operation
- Less heating of the hydraulic system
- Increased longevity of the motor and hydraulic components
- Can be retrofitted to existing hydraulic injection molding machines

The ESS system allows for a significant reduction in machine operating costs while maintaining full production parameters.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.