Rơ-moóc sàn thao tác

KÖGEL 3-Achs-Mega Chassis

You can find our complete range of vehicles, including immediately and short-term available units, on our website.

Excerpt from the equipment. Full equipment details available upon request.

Frame:
* Standard ladder-type steel lightweight frame with through crossmembers
* Pre-cambered chassis frame
* Cover plate between side frame and main beams as tire protection for the drive axle wheels of the tractor unit
* Approx. 8 mm thick coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337

Chassis:
* Axle lift mechanism on axle 1
* BPW three-axle ECO Air unit with disc brakes, approx. Ø 370 mm, ET 120
* Air suspension, approx. 260 mm stroke

Vehicle Tyres:
* 6x 445/45 R 19.5, 160J tires

Chassis attachments:
* Mechanical landing gear with compensating foot, approx. 24 t lifting capacity, single-sided operation on the right in direction of travel
* Tool-free folding side underrun protection, right and left in direction of travel
* Spare wheel carrier with winch including 1 wheel fixing kit, installed behind the axle unit
* Mounting for 16 square tube stake pockets approx. 80 x 80 x 1,990 mm, installation on both left and right sides of the longitudinal beam in direction of travel
* Waterproof plastic toolbox, internal dimensions approx. 545 x 400 x 400 mm, installed at rear left in the direction of travel
* Rear right retractable boarding ladder

Brake / Air Suspension System:
* EBS 2S/2M system with stability program (includes ABS/ALB function), EBS socket ISO 7638 (without connecting lines)
* Parking brake as spring-actuated brake, external pneumatic connections, as well as external EBS diagnostic connector via ISO 7638 socket
* WABCO EBS system
* Air suspension system including one lift and lower valve, installed on the left behind the axle unit in direction of travel. Driving position adjusts automatically
* Two foolproof coupling heads in front ISO 1728
* Brake and air reservoir tanks made of steel (EN 286-2)

Floor:
* Plywood floor panels, approx. 30 mm thick, multi-glued
* Rear floor sealed
* Pockets for square tube stakes approx. 80 x 80 mm, arrangement according to drawing J9: 8 pocket rail strips (18 stake pockets per strip: 4 outside + 10 in the center per strip)

Front wall:
* Approx. 2,000 mm high front wall with high-volume corner stanchions made of steel, profiled steel sheet, bolted/riveted to the frame, 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the bulkhead according to EN 12640. Note: When using the front wall for load securing, suitable lashing straps must be used for tensioning, especially if the vehicle is operated without side boards and tailgate/door!
* Side wall VarioFix steel perforated outer frame without stake carriers
* 24 pairs of lashing rings in the outer frame (to EN 12640), permissible tensile force approx. 5,000 kg per ring

Electrics / Electronics:
* Steel light support, positioned above the underrun protection
* KÖGEL LUXIMA Premium package consisting of: LED license plate lighting, LED marker lights and reflectors front, flashing LED side marker lamps, Superseal and bayonet light connectors
Hfsdpsx Tx Efjfx Aazjb
* 2 outline lights with arm, fitted to the multi-chamber tail lights
* 2 multi-chamber tail lights
* Fixed adapter box with 2x 7-pin sockets (1x ISO 1185 / 1x ISO 3731, 24 V-N / 24 V-S) and 15-pin socket ISO 12098
* Compact LED revolving beacon, orange, with mounting tube, arranged on the light support. Switch in the lamp casing

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.