Rơ moóc bán thấpKÄSSBOHRER
KSLA RJ Mega Jumbo Tieflader tele Wie Neu
Rơ moóc bán thấp
KÄSSBOHRER
KSLA RJ Mega Jumbo Tieflader tele Wie Neu
giá cố định chưa bao gồm thuế GTGT
80.000 €
năm sản xuất
2025
Tình trạng
Đã qua sử dụng
Vị trí
Petershagen 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
80.000 €
- Vị trí người bán:
- Auf der Tappenau 15, 32469 Petershagen, Đức

Gọi điện
Chi tiết kỹ thuật
- Trọng lượng tải tối đa:
- 26.827 kg
- Trọng lượng tổng cộng:
- 39.000 kg
- Cấu hình trục:
- 3 trục
- Đăng ký lần đầu:
- 04/2025
- Kiểm định tiếp theo (TÜV):
- 04/2026
- Chiều dài không gian chứa hàng:
- 16.240 mm
- Tổng chiều rộng:
- 2.550 mm
- Thiết bị:
- ABS
Chi tiết về đề nghị
- ID tin đăng:
- A20601960
- Cập nhật:
- lần cuối vào ngày 25.11.2025
Mô tả
Kässbohrer KSLA RJ Mega Jumbo Low Loader with Wheel Wells and Excavator Boom Recess
Hardly Used
Immediately Available
Including Winch
TECHNICAL SPECIFICATIONS:
* Fifth wheel height (H5): approx. 950 mm
* Rear swinging door: 2,300 mm
* Overall length (L): 13,190 mm
* Gooseneck length (Gl): 3,950 mm
* Platform length (Pl): 9,240 mm
* Extension (Pe): 3,500 mm
* Locking position: 500 mm
* Platform height (Ph): 770 mm
Nsdpfxoxy Ddkj Adiswp
* Wheelbase (Wb): 7,800 mm
* Axle spacing (A): 2,260 mm
* Axle load: 24,000 kg
* Axles: 12 tons technical load capacity (10 tons permissible load capacity) BPW
* Axles with drum brakes
* Axle load: 8 tons load capacity
* King pin capacity: approx. 15,000 kg
* Unladen weight ±3%: 12,173 kg
* Overall width (W): 2,550 mm + 600 mm (with extendable sides)
* Sliding platform: Not included
* Total weight (at 80 km/h): 39,000 kg
* Total weight (at 60 km/h): 42,900 kg
RUNNING GEAR:
* Number of axles: 3
* Steering type: 2 x rigid axles at the front, 1 x trailing axle at the rear
* Lift axle: Overload-dependent manual axle lift system on the 1st axle
* Lift axle control: Manual
* Wabco braking system
* Tyres: 12 x 205/65 R17.5
* 1 x spare wheel holder on front bulkhead
* Air suspension, 1 x load gauge indicating pressure at the axle assembly
* NATO socket
CHASSIS:
* S700 MC
* Gooseneck with 90° vertical corners
* 45 mm hardwood floor and steel floor with embossed pattern above the wheel wells only
* Galvanized extensions 8 x 2 for enlarging the platform width up to 300 mm
* Jost landing gear, 50 tons
* Foldable rear supports, 45 tons
* 2 pairs of wheel wells for transporting wheeled vehicles
* Wheel well bridge for covering the wells
RAMPS:
* Ramp loading capacity: approx. 40 tons
* Suitable for hydraulic folding and adjustment
* Wooden floor, 40 mm thick, 3,070 mm long, 850 mm wide, 3,715 mm high (closed), ramp angle 14°, capacity 40 tons
* Rear ramp safety: Ramp protection chain included
LOAD SECURING:
* Lashing rings: 2 x 2 x 5,000 daN capacity, 1 x 2 x 10,000 daN capacity rings on gooseneck; 3 x 2 x 5,000 daN, 4 x 2 x 10,000 daN rings on the outer platform; 2 x 2 rings with 8,000 daN capacity under the outer frame; 4 x 2 rings with 6,000 daN capacity at the tray area included
* Stake pockets: 5 x 2 stake pockets (52 x 102 mm)
* 6 x container lock housings and 4 x twistlock container locks for transporting 1 x 20FT or 1 x 30FT containers
* Gooseneck panels: 1 x steel front plate (450 mm x 2,550 mm), 2 x aluminum side panels (360 mm x 1,500 mm), 1 x aluminum rear panel (360 mm x 2,550 mm)
* Plug-in stakes: 8 x 2 units, 50 mm x 100 mm
ACCESSORIES:
* 1 x PVC-coated steel toolbox (single lid) 750 x 400 x 360 mm (H x D x W)
* 1 x rotating beacon
* 1 x work light on underrun guard
* Oversize boards with LED lighting 2 x 2 units, 423 mm x 423 mm
* Storage box on gooseneck (600 mm x 830 mm x 2,310 mm)
* Timber planks for oversize transport
* Chassis color: RAL 3020 Traffic Red
For further information, please do not hesitate to contact us.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Hardly Used
Immediately Available
Including Winch
TECHNICAL SPECIFICATIONS:
* Fifth wheel height (H5): approx. 950 mm
* Rear swinging door: 2,300 mm
* Overall length (L): 13,190 mm
* Gooseneck length (Gl): 3,950 mm
* Platform length (Pl): 9,240 mm
* Extension (Pe): 3,500 mm
* Locking position: 500 mm
* Platform height (Ph): 770 mm
Nsdpfxoxy Ddkj Adiswp
* Wheelbase (Wb): 7,800 mm
* Axle spacing (A): 2,260 mm
* Axle load: 24,000 kg
* Axles: 12 tons technical load capacity (10 tons permissible load capacity) BPW
* Axles with drum brakes
* Axle load: 8 tons load capacity
* King pin capacity: approx. 15,000 kg
* Unladen weight ±3%: 12,173 kg
* Overall width (W): 2,550 mm + 600 mm (with extendable sides)
* Sliding platform: Not included
* Total weight (at 80 km/h): 39,000 kg
* Total weight (at 60 km/h): 42,900 kg
RUNNING GEAR:
* Number of axles: 3
* Steering type: 2 x rigid axles at the front, 1 x trailing axle at the rear
* Lift axle: Overload-dependent manual axle lift system on the 1st axle
* Lift axle control: Manual
* Wabco braking system
* Tyres: 12 x 205/65 R17.5
* 1 x spare wheel holder on front bulkhead
* Air suspension, 1 x load gauge indicating pressure at the axle assembly
* NATO socket
CHASSIS:
* S700 MC
* Gooseneck with 90° vertical corners
* 45 mm hardwood floor and steel floor with embossed pattern above the wheel wells only
* Galvanized extensions 8 x 2 for enlarging the platform width up to 300 mm
* Jost landing gear, 50 tons
* Foldable rear supports, 45 tons
* 2 pairs of wheel wells for transporting wheeled vehicles
* Wheel well bridge for covering the wells
RAMPS:
* Ramp loading capacity: approx. 40 tons
* Suitable for hydraulic folding and adjustment
* Wooden floor, 40 mm thick, 3,070 mm long, 850 mm wide, 3,715 mm high (closed), ramp angle 14°, capacity 40 tons
* Rear ramp safety: Ramp protection chain included
LOAD SECURING:
* Lashing rings: 2 x 2 x 5,000 daN capacity, 1 x 2 x 10,000 daN capacity rings on gooseneck; 3 x 2 x 5,000 daN, 4 x 2 x 10,000 daN rings on the outer platform; 2 x 2 rings with 8,000 daN capacity under the outer frame; 4 x 2 rings with 6,000 daN capacity at the tray area included
* Stake pockets: 5 x 2 stake pockets (52 x 102 mm)
* 6 x container lock housings and 4 x twistlock container locks for transporting 1 x 20FT or 1 x 30FT containers
* Gooseneck panels: 1 x steel front plate (450 mm x 2,550 mm), 2 x aluminum side panels (360 mm x 1,500 mm), 1 x aluminum rear panel (360 mm x 2,550 mm)
* Plug-in stakes: 8 x 2 units, 50 mm x 100 mm
ACCESSORIES:
* 1 x PVC-coated steel toolbox (single lid) 750 x 400 x 360 mm (H x D x W)
* 1 x rotating beacon
* 1 x work light on underrun guard
* Oversize boards with LED lighting 2 x 2 units, 423 mm x 423 mm
* Storage box on gooseneck (600 mm x 830 mm x 2,310 mm)
* Timber planks for oversize transport
* Chassis color: RAL 3020 Traffic Red
For further information, please do not hesitate to contact us.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Gửi yêu cầu
Điện thoại & Fax
+49 5704 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi


































