Máy ép nhiệt
Illig UA 100 4G Solo/ BE

Name: Illig UA 100 4G Solo/ BE
Brand: Illig
Availability: InStock

Tình trạng

Đã qua sử dụng

Vị trí

Möckmühl

Hiển thị bản đồ

Thông tin về máy móc

Tên máy:: Máy ép nhiệt

nhà sản xuất:: Illig

Mô hình:: UA 100 4G Solo/ BE

Tình trạng:: được tân trang tại xưởng (đã qua sử dụng)

Giá & Vị trí

Vị trí:: Zeppelinstraße 1, 74219 Möckmühl, DE

Gọi điện

Chi tiết về đề nghị

ID tin đăng:: A19029536

cập nhật:: lần cuối vào ngày 06.10.2025

Mô tả

Max. forming area: 960 x 660 mm
Min. forming area: 210 x 170 mm
Max. sheet size: 1000 x 700 mm
Min. sheet size: 310 x 210 mm
Max. sheet thickness (manual feeding): 12 mm
Max. sheet thickness (automatic feeding): 10 mm
Max. tool height: 490 mm
Max. draw depth: 300 mm (positive/negative)
Total power consumption: approx. 64.0 kW / 115 A

Technical features:
- Siemens Simatic S7-300 control, OP 37 panel
- Air-conditioned control cabinet
- Top heater with 5 temperature control circuits via pilot emitters
- Bottom heater with 5 temperature control circuits via pilot emitters
- Individually switchable top heating elements
- Individually switchable bottom heating elements
- Parallel clamping frame
- Pneumatic motor locking for the upper reduction frame
- Cylinder locking for the lower reduction frame
- 4 cooling fans
- Adjustable vacuum for the lower table via cascade control
- Pre-blow and demolding adjustable via cascade control
- Large front opening for tool change
- Film sag control by photocell with support air
- Automatic tool change system

Lower table:
1. Tool clamping via vacuum
2. Tool change via pneumatically operated ball rollers

Upper punch:
Cjdpowf Dvaofx Agnjhc
1. Motorized remote adjustment for stroke limitation
2. Pneumatic quick-change system for tools

Sheet feeding:
- Automatic motorized lifting of the film transport chain
- With pneumatic quick-clamping system for vacuum plates
- Motorized centering of plastic sheets
- Separate vacuum pump for grained material

Optional preheating retrofit:
- Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch
- Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch
- Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel)

Optional retrofit for roll processing:
- Cross cutter and feeding rollers in feed area
- RO 800 roll stand

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.