Máy khoan khung phổ thông dùng cho xây dựng cầu thang

Hoffmann Bohrsysteme HT 200 U

Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment.
Special drilling machine for staircase construction, window construction, and universal applications through pneumatic height adjustment.
Angled dowel drilling and picket drilling can be easily performed thanks to the rotatable drilling unit.

Motor with pole changeover, two speeds.
Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm.
Motor start with a practical handle switch.
Precision chuck with two inserts, 16 mm and M10 thread.
Table size approximately 1100 x 240 mm.
Linear laser for precise positioning of the workpiece.
Drilling unit can be rotated 65 degrees to the left and right.
Nsdpfxoyfta To Apqewk
Pneumatic adjustment of the processing height, dowel drilling on two levels without retooling.
The desired drilling heights can be set for each drilling level using a handwheel and digital counter; the changeover is then performed pneumatically from the front.
Cross adjustment approximately 320 mm, stepless or in a 12 mm grid.
Drilling stroke approximately 200 mm.
2 pneumatic workpiece clamps, can be positioned at the front and rear of the table.
2 swiveling workpiece supports.
2 side stops, also usable as a front support.
Undercarriage.
Dust extraction connection 80 mm.
4 used but good drill bits, 9, 12, 16, 19 mm.

Few paint spots have been touched up; very good condition, see original photos.
A used, swiveling elongated hole drilling machine in this condition is rarely available.

CE marking.
Operating manual.

Dimensions approximately 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg.

The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in stock, see "other offers from this provider".

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.