Bộ táchHet Stempel
Pilot Crystallizer
Bộ tách
Het Stempel
Pilot Crystallizer
Năm sản xuất
2014
Tình trạng
Đã qua sử dụng
Vị trí
Lopik 

Dữ liệu cơ bản
- Tên máy:
- Bộ tách
- Nhà sản xuất:
- Het Stempel
- Mô hình:
- Pilot Crystallizer
- Năm sản xuất:
- 2014
- Tình trạng:
- gần như mới (đã qua sử dụng)
Giá & Vị trí
- Vị trí:
- Lopik, Hà Lan

Chi tiết về đề nghị
- ID tin đăng:
- A22893365
- Cập nhật:
- lần cuối vào ngày 06.10.2026
Mô tả
Pilot Crystallizer
Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development.
Including:
2 tanks, 5 liters each, for water and fat-phase ingredients.
1 buffer tank, 20 liters.
High-pressure pump, up to 75 bar.
3 crystallization cylinders, named A1 + A2 + A3.
2 pin mixers, named C75 + C150.
1 rework melter, C heat.
1 resting tube, named B200.
The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping.
The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor.
The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube.
A temperature sensor is located after each unit.
The capacity is variably adjustable, up to 50 liters per hour.
Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser.
There are 3 independent cooling circuits (for each crystallizer).
The tanks are double-jacketed, with an agitator and temperature sensors.
The entire unit is built on a frame and is mobile.
The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems.
Lsdpjz Iy Hzefx Adhjai
The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves.
All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss.
An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development.
Including:
2 tanks, 5 liters each, for water and fat-phase ingredients.
1 buffer tank, 20 liters.
High-pressure pump, up to 75 bar.
3 crystallization cylinders, named A1 + A2 + A3.
2 pin mixers, named C75 + C150.
1 rework melter, C heat.
1 resting tube, named B200.
The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping.
The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor.
The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube.
A temperature sensor is located after each unit.
The capacity is variably adjustable, up to 50 liters per hour.
Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser.
There are 3 independent cooling circuits (for each crystallizer).
The tanks are double-jacketed, with an agitator and temperature sensors.
The entire unit is built on a frame and is mobile.
The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems.
Lsdpjz Iy Hzefx Adhjai
The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves.
All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss.
An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Gửi yêu cầu
Những tin rao vặt này cũng có thể bạn quan tâm.
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Nattheim
9.425 km
Bảng điều khiển đứng cưa
FelderKappa V 60
FelderKappa V 60
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Mönchengladbach
9.608 km
Máy uốn xoay
RASRAS UpDownCenter 78.33
RASRAS UpDownCenter 78.33
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Đức
9.339 km
Nhấn phanh - thủy lực
TRUMPFTrubent 3120
TRUMPFTrubent 3120
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
London
10.018 km
Nhà máy bia
Ziemann300hl Brewhouse
Ziemann300hl Brewhouse
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Agios Athanasios
8.501 km
Thủy áp
MULLER250t
MULLER250t
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Emmeloord
9.598 km
Máy cắt khối, lát và dải Kronen KUJ năm 2018 kèm băng tải nạp liệu
KronenKUJ
KronenKUJ
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Goldenstedt
9.423 km
Máy uốn xoay
RAS67.30
RAS67.30
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Ringaudai
8.390 km
Bộ hàn
FRONIUSPLASMA WELDING
FRONIUSPLASMA WELDING
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Κερατσίνι
8.601 km
Laser diode công suất cao
LaserlineLdf 3000-30
LaserlineLdf 3000-30
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Laufenburg (Baden)
9.613 km
MABI 3000E Vario
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi



























































































