Máy đánh bóngHAU
T1500 Tischpoliermaschine
Máy đánh bóng
HAU
T1500 Tischpoliermaschine
Tình trạng
Đã qua sử dụng
Vị trí
Dietzenbach 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Máy đánh bóng
- nhà sản xuất:
- HAU
- Mô hình:
- T1500 Tischpoliermaschine
- Tình trạng:
- đã đại tu (đã qua sử dụng)
Giá & Vị trí
- Vị trí:
- Siemensstrasse 13 A, 63128 Dietzenbach, DE
Gọi điện
Bán máy móc

Bạn đã đăng tin máy đã qua sử dụng của mình chưa?
Bán hàng qua Machineseeker không mất hoa hồng.
Tìm hiểu thêm về việc bán máy móc
Tìm hiểu thêm về việc bán máy móc
Chi tiết về đề nghị
- ID tin đăng:
- A19612376
- cập nhật:
- lần cuối vào ngày 21.07.2025
Mô tả
1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm),
with 1 PES/3 polishing station and a control cabinet.
The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed.
+
1 PES/3 polishing station, 11 kW
(pneumatic lifting, 100 mm oscillation AND motorized height adjustment).
Max. wheel width 400 mm, max. wheel diameter 400 mm
Csdpfx Ajw Au A Eocwjrh
The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted.
The polishing shaft was completely re-bearinged, including the liner bearings.
The oscillation device was also completely re-sealed.
New motor, pulleys, and drive belt were installed.
+
1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.
with 1 PES/3 polishing station and a control cabinet.
The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed.
+
1 PES/3 polishing station, 11 kW
(pneumatic lifting, 100 mm oscillation AND motorized height adjustment).
Max. wheel width 400 mm, max. wheel diameter 400 mm
Csdpfx Ajw Au A Eocwjrh
The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted.
The polishing shaft was completely re-bearinged, including the liner bearings.
The oscillation device was also completely re-sealed.
New motor, pulleys, and drive belt were installed.
+
1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2008
Gửi yêu cầu
Điện thoại & Fax
+49 6074 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi