Máy đùn trục vít đôiHans Weber Maschinenfabrik
DS 85
Máy đùn trục vít đôi
Hans Weber Maschinenfabrik
DS 85
năm sản xuất
1979
Tình trạng
Đã qua sử dụng
Vị trí
Rhede 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Máy đùn trục vít đôi
- nhà sản xuất:
- Hans Weber Maschinenfabrik
- Mô hình:
- DS 85
- năm sản xuất:
- 1979
- Tình trạng:
- được tân trang tại xưởng (đã qua sử dụng)
- tính năng hoạt động:
- hoạt động hoàn toàn
- Giờ vận hành:
- 216 h
Giá & Vị trí
- Vị trí:
- Benzstr.2, 46414 Rhede
Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A20220040
- cập nhật:
- lần cuối vào ngày 06.10.2025
Mô tả
Twin-screw extruder, parallel
Manufacturer: Weber
Type: DS 85
Year of manufacture: 1979/2022
Machine no.: 85-399
Credpexlcfkjfx Acwjh
Screw geometry: for PVC-hard profiles
Screw diameter: 2 x 85 mm
Screw length: 17 x D
Screw speed: max. 30 rpm
Screw torque: 12,000 Nm
Motor power: 3.3 - 25.0 kW
Drive motor: commutator motor Elektra Faurndau
Cylinder heating/cooling zones: 4/2 (air cooling with fan)
Tool heating zones: 8
Temperature control: 12 x KS 40 digital temperature controllers (PMA)
Accessories: Mass pressure sensor and mass temperature sensor
Connected load: approx. 60 kW (without tool)
Extrusion height: 1000 or 1100 mm
Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles
Accessories: Material hopper and connection flange
Accessories: Vacuum pump (1.1 kW) incl. material separator
Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper
Weight: approx. 4000 kg
Note: The electrical control cabinet was completely renewed approx. 3 years ago.
Since then, the extruder has only been in operation for 216 hours.
Manufacturer: Weber
Type: DS 85
Year of manufacture: 1979/2022
Machine no.: 85-399
Credpexlcfkjfx Acwjh
Screw geometry: for PVC-hard profiles
Screw diameter: 2 x 85 mm
Screw length: 17 x D
Screw speed: max. 30 rpm
Screw torque: 12,000 Nm
Motor power: 3.3 - 25.0 kW
Drive motor: commutator motor Elektra Faurndau
Cylinder heating/cooling zones: 4/2 (air cooling with fan)
Tool heating zones: 8
Temperature control: 12 x KS 40 digital temperature controllers (PMA)
Accessories: Mass pressure sensor and mass temperature sensor
Connected load: approx. 60 kW (without tool)
Extrusion height: 1000 or 1100 mm
Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles
Accessories: Material hopper and connection flange
Accessories: Vacuum pump (1.1 kW) incl. material separator
Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper
Weight: approx. 4000 kg
Note: The electrical control cabinet was completely renewed approx. 3 years ago.
Since then, the extruder has only been in operation for 216 hours.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Gửi yêu cầu
Điện thoại & Fax
+49 2871 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi