Sơ mi rơ moóc sàn phẳng & bạtFLIEGL
SDS 390 Gardine Standard Ultralight Coil
Sơ mi rơ moóc sàn phẳng & bạt
FLIEGL
SDS 390 Gardine Standard Ultralight Coil
EXW giá cố định chưa bao gồm thuế GTGT
24.990 €
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Triptis 

Thông tin về máy móc
- Tên máy:
- Sơ mi rơ moóc sàn phẳng & bạt
- Nhà sản xuất:
- FLIEGL
- Số máy:
- WFDFLT33902029406
- Tình trạng:
- đã qua sử dụng
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
EXW giá cố định chưa bao gồm thuế GTGT
24.990 €
- Vị trí:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

Gọi điện
Chi tiết kỹ thuật
- Trọng lượng không tải:
- 5.800 kg
- Trọng lượng tải tối đa:
- 29.200 kg
- Trọng lượng tổng cộng:
- 35.000 kg
- Cấu hình trục:
- 3 trục
- Đăng ký lần đầu:
- 12/2021
- Kiểm định tiếp theo (TÜV):
- 06/2027
- Chiều dài không gian chứa hàng:
- 13.650 mm
- Chiều rộng khoang hàng:
- 2.480 mm
- Chiều cao khoang chứa hàng:
- 2.790 mm
- Hệ thống treo:
- không khí
- Kích thước lốp xe:
- 385/65 R22.5"
- Màu sắc:
- bạc
Chi tiết về đề nghị
- ID tin đăng:
- A19083991
- Số tham chiếu:
- 59340
- Cập nhật:
- lần cuối vào ngày 06.06.2026
Mô tả
The images are archive images; the vehicle may still be in use.
Chassis, semi-trailer, transport company
Fine-grain steel, welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approximately 8,040 mm long, 6 coil supports (coil pockets, internal dimensions 82 x 52 mm), coil cover with screen-printed panels and steel crossbars, 2 gap band covers for the coil well, each approximately 293 mm wide, tare weight approximately 13 kg per cover, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, note: to attach the straps in conjunction with the side panels, the side panels must be opened! 9 pairs of lashing eyes, each rated at 5 tons, embedded in the area of the coil well, 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without slide-out compensation, note: free support foot clearance or free rear swivel radius approximately 1930 mm, without supports, extension ladder at the rear, door latch on the side, 2 chocks with holder, aluminum side impact protection, bracket positioned transversely to the longitudinal beam and attached to the longitudinal beam to support aluminum slats, aluminum underrun protection, semi-elliptical fenders, with anti-splash flaps according to EC regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stake pockets embedded in the outer frame, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 19219,
Godjwhp A Djpfx Ac Iebn
2 stake pockets embedded centrally in the floor, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 192198, note: stake pockets/recesses are not designed for the sole securing of long materials, pipes, etc., without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight, air suspension,
without lift axle.
The images are archive images; the vehicle may still be in use.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Chassis, semi-trailer, transport company
Fine-grain steel, welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approximately 8,040 mm long, 6 coil supports (coil pockets, internal dimensions 82 x 52 mm), coil cover with screen-printed panels and steel crossbars, 2 gap band covers for the coil well, each approximately 293 mm wide, tare weight approximately 13 kg per cover, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, note: to attach the straps in conjunction with the side panels, the side panels must be opened! 9 pairs of lashing eyes, each rated at 5 tons, embedded in the area of the coil well, 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without slide-out compensation, note: free support foot clearance or free rear swivel radius approximately 1930 mm, without supports, extension ladder at the rear, door latch on the side, 2 chocks with holder, aluminum side impact protection, bracket positioned transversely to the longitudinal beam and attached to the longitudinal beam to support aluminum slats, aluminum underrun protection, semi-elliptical fenders, with anti-splash flaps according to EC regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stake pockets embedded in the outer frame, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 19219,
Godjwhp A Djpfx Ac Iebn
2 stake pockets embedded centrally in the floor, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 192198, note: stake pockets/recesses are not designed for the sole securing of long materials, pipes, etc., without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight, air suspension,
without lift axle.
The images are archive images; the vehicle may still be in use.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Lần truy cập cuối: tuần trước
Đã đăng ký từ: 2006
190 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 36482... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi


















