Bàn xoay, bàn xoay khí nénFesto Pneumatk
ST-270 A
Bàn xoay, bàn xoay khí nén
Festo Pneumatk
ST-270 A
Tình trạng
Đã qua sử dụng
Vị trí
Sundern (Sauerland) 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Bàn xoay, bàn xoay khí nén
- Nhà sản xuất:
- Festo Pneumatk
- Mô hình:
- ST-270 A
- Tình trạng:
- đã qua sử dụng
Giá & Vị trí
- Vị trí:
- 59846 Sundern (Sauerland), Nordrhein-Westfalen, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A21541978
- Cập nhật:
- lần cuối vào ngày 19.03.2026
Mô tả
No. 720: Seldom used pneumatic rotary indexing table, 270 mm, 8 positions
No. 721: Machine vice, jaw width 125 mm, clamping width 250 mm, rotatable, 360-degree scale
No. 722: Bending roll, 350 mm diameter, throat 50 x 60 mm, bending groove 20 mm diameter
No. 723: Mounting plate, 500 mm diameter x 30 mm, flange 230 x 30 mm, second side 120 x 25 mm, mounting holes 6 positions
No. 724: Flange 350 x 55 mm, collar 230 x 5 mm, 4 x M16 PCD 275 mm, bore 40 mm, bottom side recess 200 x 15 mm
No. 725: Press brake tool, 90 degrees, bending length 250 mm, tool length 550 mm
No. 726: Flange 250 x 30 mm, 4 bolts PCD 130 mm, 3 holes PCD 210 mm, bore 102 mm, lower side collar 200 x 5 mm
No. 727: Festo feed unit BV 100200 with control block, max. belt width 60 mm, max. feed 200 mm
No. 109: Electromechanical rotary indexing table, 8 stations, table 850 x 850 x 830 mm, 2 control cabinets
Prices on request
All dimensions are non-binding; if you require exact measurements, please inquire.
Isdpfx Afjyvqc Iexjhw
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
No. 721: Machine vice, jaw width 125 mm, clamping width 250 mm, rotatable, 360-degree scale
No. 722: Bending roll, 350 mm diameter, throat 50 x 60 mm, bending groove 20 mm diameter
No. 723: Mounting plate, 500 mm diameter x 30 mm, flange 230 x 30 mm, second side 120 x 25 mm, mounting holes 6 positions
No. 724: Flange 350 x 55 mm, collar 230 x 5 mm, 4 x M16 PCD 275 mm, bore 40 mm, bottom side recess 200 x 15 mm
No. 725: Press brake tool, 90 degrees, bending length 250 mm, tool length 550 mm
No. 726: Flange 250 x 30 mm, 4 bolts PCD 130 mm, 3 holes PCD 210 mm, bore 102 mm, lower side collar 200 x 5 mm
No. 727: Festo feed unit BV 100200 with control block, max. belt width 60 mm, max. feed 200 mm
No. 109: Electromechanical rotary indexing table, 8 stations, table 850 x 850 x 830 mm, 2 control cabinets
Prices on request
All dimensions are non-binding; if you require exact measurements, please inquire.
Isdpfx Afjyvqc Iexjhw
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2026
50 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 160 3... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi


































































