Rơ-moóc sàn thao tác

FAYMONVILLE MAX410 Ballastauflieger

More vehicles available upon request.
Excerpt from the equipment:
Complete equipment list available upon request.

Equipment:
* Loading platform
* with approximately 30 mm thick hardwood flooring
* 8 pairs of lashing rings, foldable outwards (LC 10,000 daN)
* Turntable supports: JOST turntable supports (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load)

Tires:
* 385/65 R 22.5
* TPMS tire pressure monitoring system according to ECE R 141
* Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992.
* For correct display, the tractor unit must be able to transmit and display this data.

Axles and Suspension:
* BPW axles, technical capacity 10,000 kg each
* 1st and 3rd axles hydro-mechanically steered and mounted on a turntable
* 2nd axle, rigid, air-sprung with lift and lower valve
* Axle tool

Braking System:
* Wabco braking system according to EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit.

Electrical System:
* according to EU regulations
* Lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15-pin connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098

Steel Construction:
* made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa)
* S690QL/S700MC (yield strength 690 MPa)

Painting:
* Complete steel construction automatically blasted after welding using a shot blasting system.
* Second blasting process with corundum for optimal adhesion of the coating system.
* Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red according to the RAL 841GL system.
* Rear part metallized and painted in RAL 9010 (pure white).
* Rims painted in silver, tested in the salt spray test according to ISO 9227-NSS.
* Sealing of cavities with special wax.

Accessories:
* Loading platform with approximately 30 mm thick hardwood flooring
* 2-inch King Pin
* One galvanized steel front wall (EN12642-XL), approximately 1,200 mm high.
* Yellow-red air couplings on the galvanized front connection bar.
* 4 wheel chocks with holders on the front wall.
Podpfx Acs Ad Tdlowogu
* Storage for approximately 1,000 mm lashing bars in the rear central beam.
* On the gooseneck and the rear plate, one holder each for warning signs including socket, on the left and right.
* Yellow reflector tape according to EU regulations on the side and rear of the trailer.
* 10 pairs of lashing bar pockets for lashing bars approximately 100 x 50 mm in the outer frame of the loading platform.
* European reflector plates (red-yellow) on the rear of the trailer.
* One holder for a rotating beacon on the rear of the trailer.
* One mud flap on the rear of the trailer. Manual and description on a USB stick.
* Speed sticker 80 km/h on the rear and on both sides.
* Electro-hydraulic unit
* 1 maneuvering coupling with reinforcement screwed onto the end cross member.
* Load manometer for determining the axle loads including load diagram.
* Central lubrication system BEKAMAX (Pico) with normal grease NLGI-2 and removable protection around the pump.
* Steering from the front and rear via cable remote control operable via push buttons.
* with single-axle control (without installation in the tractor unit)
* 7 pairs of galvanized lashing bars approximately 100 x 50 mm, approximately 1,000 mm high.
* 4 pairs of lashing bar rail strips, mounted across in the loading platform, fo

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.