Rơ-moóc sàn thao tácFAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
 Rơ-moóc sàn thao tác
FAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
                                                     giá cố định chưa bao gồm thuế GTGT                                            
                                            49.750 €                                    
            Tình trạng        
            Đã qua sử dụng                    
            Vị trí        
                                                Essen                                            

 Hình ảnh cho thấy            
 Hiển thị bản đồ            
Thông tin về máy móc
Giá & Vị trí
                             giá cố định chưa bao gồm thuế GTGT                    
                            49.750 €                    
- Vị trí người bán:
-     Heegstraße 6-8, 45356 Essen, Đức             
 Gọi điện            
Chi tiết kỹ thuật
- Trọng lượng tải tối đa:
- 38.390 kg
- Trọng lượng tổng cộng:
- 48.000 kg
- Cấu hình trục:
- 3 trục
- Đăng ký lần đầu:
- 03/2024
- Kiểm định tiếp theo (TÜV):
- 03/2026
- Tổng chiều rộng:
- 2.540 mm
- Thiết bị:
- ABS
Chi tiết về đề nghị
- ID tin đăng:
- A20421315
- Số tham chiếu:
- 33271
- Cập nhật:
- lần cuối vào ngày 31.10.2025
Mô tả
        You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
Rcodpfxexth Ads Afpeh
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
Rcodpfxexth Ads Afpeh
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
            Lưu ý:        Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.    
Đã đăng ký từ: 2003
Gửi yêu cầu
Điện thoại & Fax
                            +49 201 8... quảng cáo                
            Quảng cáo của bạn đã được xóa thành công            
            Đã xảy ra lỗi            
















