Rơ moóc bán thấp

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader 205er

You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.

Extract from the equipment. Complete equipment details available on request.

Gooseneck:
- Gooseneck with front chamfered corners approx. 45° and rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring approx. 30 mm thick

Loading area:
- Loading area with extendable design
- 5 pairs of externally folding lashing rings (LC 5,000 daN)
- 3 pairs of externally folding lashing rings (LC 10,000 daN)
- 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN)
- Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN)
- Hardwood flooring approx. 48 mm thick, checker plate over axles

Landing gear:
- JOST mechanical landing legs with two-speed gearbox for 24 t lifting capacity (50 t test load)

Tyres:
- Tyres 205/65 R 17.5, twin-mounted
Gjdpfjx Uvlrsx Agqett

Axles:
- BPW axles, two rigid axles, two steering trailing axles
- Air suspension, with drum brakes
- With raise/lower function
- Trailing steering axles with electromagnetically operated reverse lock, activated via reverse gear or manually

Braking system:
- Braking system compliant with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit

Steel structure:
- Steel construction made of high-strength fine-grained steels
- Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)

Painting:
- First-class, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) top coat, solid color in RAL 3002 Carmine Red
- Rear section metallized and painted in RAL 9010 (Pure White)
- Rims in silver

Electrical system:
- Electrical system in compliance with EU regulations

Lighting:
- 24 Volt ASPÖCK NORDIK (ASS3)
- ASPÖCK UNIBOX at the front connector panel with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098

Accessories included:
- 2-inch kingpin
- A galvanized steel front wall approx. 400 mm high
- A spare wheel holder in front of the front wall
- Yellow-red air couplings on the galvanized connector panel at the front
- 4 wheel chocks with holder at the front wall
- Accommodation at the rear of the gooseneck for ALU loading ramps
- Galvanized folding supports under the loading area's chamfer
- Bracket for a rotating beacon at the rear of the trailer
- Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer
- One bracket each for warning signs with socket on both left and right of the gooseneck and rear plate
- One mudflap at the rear of the trailer
- Manual and documentation on USB stick
- European reflective panels (red-yellow) at the rear of the trailer
- 80 km/h speed labels at the rear and on both sides
- Acoustic reverse warning signal
- Load gauge for determining axle loads, including load diagram

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.