Rơ-moóc sàn thao tácFAYMONVILLE
Doppeltele, MAX Trailer MAX210 Telesattel
Rơ-moóc sàn thao tác
FAYMONVILLE
Doppeltele, MAX Trailer MAX210 Telesattel
giá cố định chưa bao gồm thuế GTGT
98.900 €
Tình trạng
Đã qua sử dụng
Vị trí
Essen 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
98.900 €
- Vị trí người bán:
- Heegstraße 6-8, 45356 Essen, Đức
Gọi điện
Bán máy móc

Tìm thấy máy mới chưa? Giờ hãy biến cái cũ thành tiền.
Đạt được giá tốt nhất thông qua Machineseeker.
Tìm hiểu thêm về việc bán máy móc
Tìm hiểu thêm về việc bán máy móc
Chi tiết kỹ thuật
- Trọng lượng tổng cộng:
- 48.000 kg
- Trọng lượng tải tối đa:
- 36.300 kg
- Cấu hình trục:
- 3 trục
- Đăng ký lần đầu:
- 08/2024
- Kiểm định tiếp theo (TÜV):
- 08/2025
- Tổng chiều rộng:
- 2.540 mm
- Thiết bị:
- ABS
Chi tiết về đề nghị
- ID tin đăng:
- A12865280
- Số tham chiếu:
- 31536
- cập nhật:
- lần cuối vào ngày 29.08.2025
Mô tả
You can find our complete range of vehicles, including those available immediately and at short notice, on our website.
Excerpt from the equipment. Full equipment details available upon request.
- Load area in a double-extendable version with pneumatically operated locking mechanism
- A fixed intermediate table, approx. 250 mm wide, mounted on the central beam
- BPW axles and suspension, all axles hydro-mechanically forced-steered
- Air suspension with lift and lower valve
- Tyres: 385/65 R 22.5
- JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
- Braking system according to EU regulations with EBS-E (2S2M)
- Disc brakes
- 2-inch kingpin
- Electro-hydraulic unit
- Remote steering from the front and rear via cable remote control
Crsdjpkx Easpfx Acwoh
- 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the load area
- Load gauge for axle load determination, including load diagram
- A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- 6 pairs of WADER container locks embedded in the load area, for 1 x 20' container, 2 x 20' containers or 1 x 40' container. An additional locking point is provided in the extension for a 45' container
- 5 pairs of crosswise mounted stake pocket strips in the load area
- Storage for max. 9 pairs of plug-in stakes approx. 100 x 50 mm, inside on the front wall
- One tool box INOX, approx. 1,200 x 460 x 550 mm, mounted at the front under the load area on the left and right
- Central lubrication system with 2 BEKAMAX pumps (Pico)
- 2 LED reversing lights mounted on the rear panel
- Acoustic warning signal when reversing
- Collision protection left and right on the rear crossmember
- 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
- HRM metallization (High Resistance Metallisation)
- Single-colour paintwork in RAL 3002 carmine red
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Excerpt from the equipment. Full equipment details available upon request.
- Load area in a double-extendable version with pneumatically operated locking mechanism
- A fixed intermediate table, approx. 250 mm wide, mounted on the central beam
- BPW axles and suspension, all axles hydro-mechanically forced-steered
- Air suspension with lift and lower valve
- Tyres: 385/65 R 22.5
- JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
- Braking system according to EU regulations with EBS-E (2S2M)
- Disc brakes
- 2-inch kingpin
- Electro-hydraulic unit
- Remote steering from the front and rear via cable remote control
Crsdjpkx Easpfx Acwoh
- 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the load area
- Load gauge for axle load determination, including load diagram
- A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- 6 pairs of WADER container locks embedded in the load area, for 1 x 20' container, 2 x 20' containers or 1 x 40' container. An additional locking point is provided in the extension for a 45' container
- 5 pairs of crosswise mounted stake pocket strips in the load area
- Storage for max. 9 pairs of plug-in stakes approx. 100 x 50 mm, inside on the front wall
- One tool box INOX, approx. 1,200 x 460 x 550 mm, mounted at the front under the load area on the left and right
- Central lubrication system with 2 BEKAMAX pumps (Pico)
- 2 LED reversing lights mounted on the rear panel
- Acoustic warning signal when reversing
- Collision protection left and right on the rear crossmember
- 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
- HRM metallization (High Resistance Metallisation)
- Single-colour paintwork in RAL 3002 carmine red
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2003
Gửi yêu cầu
Điện thoại & Fax
+49 201 8... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi