Robot vẽ tranh, robot công nghiệp

FANUC P-250iA/15

This is a painting robot from Fanuc. It was once used at BMW to clear coat luxury car bodies and, with its 40000 hours, has a certain working life behind it. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control system. The second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would then be connected directly to the robot.
The cable length between the robot and the controller is 10 m and can be plugged into the controller. This is also special.
We can help with transportation and installation.
It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation.
At the moment it is configured as left-armed and left-handed.
It has line tracking.
However, this can easily be changed without mechanical conversion.
The device is still with our customer, but can be inspected under voltage at Paintrobotics if you are seriously interested.
We have two of them.
We would also bring the device to us from Frankfurt.
Isdpfxstu H Hcs Actsih

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.