Rơ-moóc sàn thao tácES-GE
3-Achs Sattelanhänger - Bordwände + CV
Rơ-moóc sàn thao tác
ES-GE
3-Achs Sattelanhänger - Bordwände + CV
Tình trạng
Mới
Vị trí
Essen 

Dữ liệu cơ bản
Giá & Vị trí
- Vị trí người bán:
- Heegstraße 6-8, 45356 Essen, Đức

Gọi điện
Chi tiết kỹ thuật
Kích thước và trọng lượng
Trọng lượng tổng cộng:
43.000 kg
Trọng lượng tải tối đa:
35.440 kg
Trục và bánh xe
Cấu hình trục:
3 trục
Tính năng an toàn
ABS
Chi tiết về đề nghị
- ID tin đăng:
- A23366668
- Số tham chiếu:
- 36622
- Cập nhật:
- lần cuối vào ngày 21.11.2026
Mô tả
You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website.
Excerpt from the equipment:
Complete equipment available upon request.
Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads.
* Underrun protection, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, front neck height approx. 130 mm.
Coupling device
* 2-inch kingpin hitch: 2 x 12 t hitches with level foot and single-side operation on the right-hand side.
Axles
* 3 x 9 t air suspension axle unit, disc brakes 22.5, total travel approx. 180 mm, lifting and lowering device via rotary valve.
Ksdpfx Ade Aldapehond
Braking system
* Two-circuit air brake system according to EC with EBS and RSS.
* Automatic load-dependent regulation.
* Spring brake cylinders as parking brake.
* Interlock-protected coupling heads fixed to the front cross member, without connection line to the towing vehicle.
Tires
* 6, 385/55 R22,5 160J on steel rim 11.75 X 22,5 ET 120.
* Manufacturer of our choice, tire pressure monitoring system (TPMS) via CAN-bus system of the EBS.
Load securing
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t.
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t.
* In the outer frame, holes approx. every 400-600 mm for attaching lashing straps.
Front wall
* Reinforced steel construction, fixed, approx. 1,400 mm high, interior paneling with approx. 9 mm screen-printed sheet (approx. 1,250 mm high).
Floor
* Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles.
Lighting system
* According to EC, 24 volts.
* With multi-chamber lights.
* LED side marker lights.
* LED position lights, white, front.
* LED outline lights, rear.
* License plate lights.
* Lane-keeping lights, LED. 1x15- and 2x7-pin connectors on the front cross member.
Equipment
* 2 wheel chocks with holder.
* Warning signs ECE 70.
* Holder for rotating beacon, including rotating beacon.
* 2 rubber rub rails at the rear.
* Folding and extendable ladder at the rear right (without platform).
* 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles.
Paint
* Front wall: RAL 9005 deep black.
* Chassis: Hot-dip galvanized, outer frame hot-dip galvanized + RAL 9005 deep black.
* Middle beams: RAL 9005 deep black.
* SSV: Aluminum, anodized.
* Underrun protection: white (RAL 9016 traffic white).
* Components: galvanized/black KTL coating.
* Rims: silver.
* Contour marking: complete, yellow.
Incl. accessories
* First axle can be lifted, with fully automatic, load-dependent lift control.
* 10 pairs of stake pockets in the outer frame, evenly distributed.
* 4 rows of stake pockets transverse to the loading area.
* 20 pieces of stakes made of galvanized tube 80/50, total length approx. 1,200 mm.
* Inside on the front wall, a magazine for 20 pieces of plug-in stakes.
* 5 x 250 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable.
* Removable Kinnegrip stakes.
* Side wall and stake magazine: under the chassis, left and right, slide rails for side walls and stakes. Container locks for 1 x 40" and 2 x 20" containers, flush at the rear. Container locks for 1 x 20" container, in the middle.
* Work lights on the lamp carrier (switched on when reverse gear is eng
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Excerpt from the equipment:
Complete equipment available upon request.
Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads.
* Underrun protection, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, front neck height approx. 130 mm.
Coupling device
* 2-inch kingpin hitch: 2 x 12 t hitches with level foot and single-side operation on the right-hand side.
Axles
* 3 x 9 t air suspension axle unit, disc brakes 22.5, total travel approx. 180 mm, lifting and lowering device via rotary valve.
Ksdpfx Ade Aldapehond
Braking system
* Two-circuit air brake system according to EC with EBS and RSS.
* Automatic load-dependent regulation.
* Spring brake cylinders as parking brake.
* Interlock-protected coupling heads fixed to the front cross member, without connection line to the towing vehicle.
Tires
* 6, 385/55 R22,5 160J on steel rim 11.75 X 22,5 ET 120.
* Manufacturer of our choice, tire pressure monitoring system (TPMS) via CAN-bus system of the EBS.
Load securing
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t.
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t.
* In the outer frame, holes approx. every 400-600 mm for attaching lashing straps.
Front wall
* Reinforced steel construction, fixed, approx. 1,400 mm high, interior paneling with approx. 9 mm screen-printed sheet (approx. 1,250 mm high).
Floor
* Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles.
Lighting system
* According to EC, 24 volts.
* With multi-chamber lights.
* LED side marker lights.
* LED position lights, white, front.
* LED outline lights, rear.
* License plate lights.
* Lane-keeping lights, LED. 1x15- and 2x7-pin connectors on the front cross member.
Equipment
* 2 wheel chocks with holder.
* Warning signs ECE 70.
* Holder for rotating beacon, including rotating beacon.
* 2 rubber rub rails at the rear.
* Folding and extendable ladder at the rear right (without platform).
* 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles.
Paint
* Front wall: RAL 9005 deep black.
* Chassis: Hot-dip galvanized, outer frame hot-dip galvanized + RAL 9005 deep black.
* Middle beams: RAL 9005 deep black.
* SSV: Aluminum, anodized.
* Underrun protection: white (RAL 9016 traffic white).
* Components: galvanized/black KTL coating.
* Rims: silver.
* Contour marking: complete, yellow.
Incl. accessories
* First axle can be lifted, with fully automatic, load-dependent lift control.
* 10 pairs of stake pockets in the outer frame, evenly distributed.
* 4 rows of stake pockets transverse to the loading area.
* 20 pieces of stakes made of galvanized tube 80/50, total length approx. 1,200 mm.
* Inside on the front wall, a magazine for 20 pieces of plug-in stakes.
* 5 x 250 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable.
* Removable Kinnegrip stakes.
* Side wall and stake magazine: under the chassis, left and right, slide rails for side walls and stakes. Container locks for 1 x 40" and 2 x 20" containers, flush at the rear. Container locks for 1 x 20" container, in the middle.
* Work lights on the lamp carrier (switched on when reverse gear is eng
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2003
68 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 201 8... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Essen
9.562 km
Rơ-moóc sàn thao tác
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Essen
9.562 km
Rơ-moóc sàn thao tác
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Essen
9.562 km
Rơ-moóc sàn thao tác
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi



































