Máy khoan xuyên tâm nhanh chóng

DONAU Danuport 540

Dimensions and travel paths
Tool holder SK 40
Table dimensions mm 4000 x 800
Number of T-slots 6
Distance between T-slots mm 140
Distance between spindle bottom edge min. mm 140
Table top edge max. mm 740
Drilling radius min mm 540
max. mm 1590
U-axis travel path mm 2600
Y-axis travel path mm 1050
Quill stroke (Z-axis) mm 200
Column stroke (W-axis) mm 400

Cutting values
Drilling capacity into solid material St 60 mm 40
GG 22 mm 50
Thread cutting St 60 M 36
GG 22 M 42

Main spindle drive
AC motor, frequency-controlled kW 5.5 at 100% duty cycle.
Speed range: min -1 15 - 2800
Torque Nm max. 250
constant from min -1 15 - 200
Feed drives
X-axis - AC servo motor kW 0.25
Y-axis - AC servo motor kW 0.25
Z-axis - AC servo motor kW 4.50
W-axis - AC servo motor kW 2.50
U-axis - AC servo motor kW 2.50
Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5
Rapid traverse speeds (U/W): m/min. 7.5 / 3
Feed rates infinitely variable mm/min. 5 - 2000
Feed force N 12000

Accuracy
Positioning accuracy X, Y axis
up to 1200 mm mm ± 0.075
Repeatability X, Y axis mm ± 0.03
Positioning accuracy Z axis mm ± 0.05
Repeatability Z axis mm ± 0.03
Positioning accuracy W axis mm ± 0.05
Repeatability W axis mm ± 0.03

Electrical data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Total connected load kVA 13.0

CNC control
Axes: 5 (X, Y, Z, W, U), expandable
Screen: TFT flat screen backlit, easy to read from all sides
Position information: Cartesian or polar, dimensions absolute or incremental,
Unit of measurement: mm or inch or in degrees
Interpolation: 2 axes (X, Y)
Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material
Tool management: max. 500 tools
Sub-program technology: yes
Machining cycles: cycles for centering, drilling, thread cutting,
reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle
Chip breaking / chip removal: possible for drilling cycle
Drilling patterns: row of holes, circle of holes, matrix
Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry
Zero point determination: cycles for determining zero points by manually
touching the workpiece for:
- any clamped right-angled parts
- any clamped round parts
- mediation of cast and burnt parts
- Angular position detection for round parts by touching
- reference edges or surfaces
Data interfaces USB interface

Painting (new painting)
Standard painting, two-component textured paint
Machine upper part light gray RAL 7035
Machine lower part signal blue RAL 5005

Documentation
Operating and programming instructions
Tedpfx Asv If T Tjhusb
Electronics circuit diagram
Spare parts drawings
Test report for mechanics, electrics and safety equipment

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.