Máy ép phun nhựaDEMAG
IntElect2 350/830-2200
Máy ép phun nhựa
DEMAG
IntElect2 350/830-2200
Năm sản xuất
2022
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Wembley 

Dữ liệu cơ bản
- Tên máy:
- Máy ép phun nhựa
- Nhà sản xuất:
- DEMAG
- Mô hình:
- IntElect2 350/830-2200
- Số máy:
- IntElect2 350/830-2200
- Năm sản xuất:
- 2022
- Tình trạng:
- gần như mới (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
- Giờ vận hành:
- 14.500 h
Giá & Vị trí
- Vị trí:
- 12 Hallmark Centre, HA9 0LB London, United Kingdom

Gọi điện
Chi tiết kỹ thuật
Kích thước và trọng lượng
Trọng lượng tổng cộng:
21.000 kg
Chi tiết công suất
Điện áp đầu vào:
400 V
Tần số đầu vào:
50 Hz
Tài liệu và chứng nhận
Tài liệu / sổ tay hướng dẫn
Thông tin chi tiết
Lực kẹp:
350 kN
Khoảng cách giữa các cột:
830 mm
Lực đẩy:
60 N
Hành trình đẩy ra:
250 mm
Áp suất phun:
2.426 thanh
Trọng lượng phun:
820 g
Chiều cao khuôn (tối thiểu):
400 mm
Đường kính trục vít:
60 mm
Chi tiết về đề nghị
- ID tin đăng:
- A23369110
- Số tham chiếu:
- PM175
- Cập nhật:
- lần cuối vào ngày 23.11.2026
Mô tả
Sumitomo Demag IntElect2 350/830-2200 – 2022 – 15,000 Hours .
Manufacturer: Sumitomo Demag
Model: IntElect2 350/830-2200
Year of manufacture: 2022
Machine type: All-electric injection moulding machine
Condition: Very good, available for inspection under power by appointment
Operating hours: Approximately 15,000 hours
Machine description
For sale is a 2022 Sumitomo Demag IntElect2 350/830-2200 all-electric injection moulding machine.
This modern, high-performance injection moulding machine is in very good working condition and remains in production. It has only approximately 15,000 operating hours .
The IntElect2 series is known for its precision, energy efficiency, repeatability and high-performance electric drive technology.
With a 350-tonne clamping force and 60 mm screw, this machine is suitable for a wide range of demanding plastic injection moulding applications.
The machine is available for inspection and demonstration under power by appointment
No robot included.
Laodpfx As Algp Aodhji
Technical specifications
General
Manufacturer: Sumitomo Demag
Model: IntElect2 350/830-2200
Year: 2022
Clamping force: 3,500 kN / 350 tonnes
Operating hours: Approximately 15,000
Drive system: All-electric
Condition: Available for inspection under power by appointment
Clamping unit
Maximum mould opening stroke: 725 mm
Tie-bar spacing: 830 × 830 mm
Maximum mould weight: 6,600 kg
Injection unit
Injection unit: 2200
Screw diameter: 60 mm
Maximum injection volume: 891 cm³
Maximum injection speed: 160 mm/s
Maximum injection pressure: 2,426 bar
Ejector
Ejector stroke: 250 mm
Standard ejector force: 60 kN
Additional information
Located in the UK
Low operating hours for its age
No robot included
Available for inspection under power by appointment
Sale information
A fantastic opportunity to purchase a modern 2022 Sumitomo Demag all-electric injection moulding machine with relatively low operating hours.
Further photographs, technical information and inspection appointments available on request.
Manufacturer: Sumitomo Demag
Model: IntElect2 350/830-2200
Year of manufacture: 2022
Machine type: All-electric injection moulding machine
Condition: Very good, available for inspection under power by appointment
Operating hours: Approximately 15,000 hours
Machine description
For sale is a 2022 Sumitomo Demag IntElect2 350/830-2200 all-electric injection moulding machine.
This modern, high-performance injection moulding machine is in very good working condition and remains in production. It has only approximately 15,000 operating hours .
The IntElect2 series is known for its precision, energy efficiency, repeatability and high-performance electric drive technology.
With a 350-tonne clamping force and 60 mm screw, this machine is suitable for a wide range of demanding plastic injection moulding applications.
The machine is available for inspection and demonstration under power by appointment
No robot included.
Laodpfx As Algp Aodhji
Technical specifications
General
Manufacturer: Sumitomo Demag
Model: IntElect2 350/830-2200
Year: 2022
Clamping force: 3,500 kN / 350 tonnes
Operating hours: Approximately 15,000
Drive system: All-electric
Condition: Available for inspection under power by appointment
Clamping unit
Maximum mould opening stroke: 725 mm
Tie-bar spacing: 830 × 830 mm
Maximum mould weight: 6,600 kg
Injection unit
Injection unit: 2200
Screw diameter: 60 mm
Maximum injection volume: 891 cm³
Maximum injection speed: 160 mm/s
Maximum injection pressure: 2,426 bar
Ejector
Ejector stroke: 250 mm
Standard ejector force: 60 kN
Additional information
Located in the UK
Low operating hours for its age
No robot included
Available for inspection under power by appointment
Sale information
A fantastic opportunity to purchase a modern 2022 Sumitomo Demag all-electric injection moulding machine with relatively low operating hours.
Further photographs, technical information and inspection appointments available on request.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2025
2 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+44 7989 ... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Kreuztal
9.509 km
Máy ép phun nhựa
Sumitomo (SHI) DemagIntElect 2 350/830-2200 mit Roboter-Sys
Sumitomo (SHI) DemagIntElect 2 350/830-2200 mit Roboter-Sys
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi


































