Trung tâm gia công

Deckel Maho DMU 50 EVO linear

Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, TOP condition

Technical data:

>> Year of manufacture 2006
>> Manufacturer Heidenhain, type iTNC 530
>> Travel paths X500/Y450/Z400
>> C-axis 360 degrees
>> B-axis 0 degrees to 161.955 degrees
>> Tool holder HSK A63
>> Max. spindle speed up to 18000 rpm
>> Feed continuously programmable up to X, Y, Z 20000 mm/min
Fedpfx Acjvyr Tdozjgh
C-B axis continuously programmable up to rapid traverse speed
>> Rapid traverse Y- Z axis 50 m/min
X-axis 80 m/min (linear drive)
B-axis 40 rpm
C-axis 50 rpm
>> Tool magazine: Double gripper 60 magazine spaces
>> Table clamping area Ø 500 x 380 mm
T-slot spacing 63/14H7
>> Table load 200 KG
>> Dimensions and weight: approx.
Machine without control and attachments
Depth 3.0 meters Width 2.4 meters Height 2.6 meters
Weight approx. 7000 kg
>> Operating voltage 400 V
>> electr. Handwheel Heidenhain HR 410
>> Power connection 17 KVA
>> Chip conveyor
>> Active spindle cooling
>> Mist extraction
>> IKZ 40 bar
>> Coolant lubricant cleaning system (fleece filter system)
>> Spray gun
>> Visiport
>> Sealing air on the measuring system
>> Preparation for robot loading
>> 3D probe Heidenhain TS640
>> 3D Quick Set
>> Kinematics
>> Blum laser for tool measurement and breakage control
Cpvnunmsoi
>> Complete documentation
Dn2F2R
The following work was carried out:

>> Generally overhauled main work spindle
>> Complete maintenance: All cooling hoses and pneumatic hoses replaced, new filters, fluids and belts replaced. Scrapers, etc. Complete cleaning.
>> Geometrically measured (acceptance protocol)

About the machine:

A Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain is offered. The machine is in very good condition. The main spindle on the DMU was overhauled (replacement spindle), completely serviced and an acceptance protocol was created. Take advantage of the opportunity to view and try out the machine on site with power on.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.